595429
22
Zoom out
Zoom in
Previous page
1/28
Next page
19
PBH 1500 A1
GB
Total vibration values (vector total of three directions)
determined in accordance with EN 60745:
Main handle
Hammer drilling in
Concrete: a
h(HD)
= 10.428 m/s
2
, K = 1.5 m/s
2
Additional handle
Hammer drilling in
Concrete: a
h(HD)
= 8.15 m/s
2
, K = 1.5 m/s
2
Main handle
Chiselling: a
h(CHeq)
= 15.014 m/s
2
, K = 1.5 m/s
2
Additional handle
Chiselling: a
h(CHeq)
= 11.201 m/s
2
, K = 1.5 m/s
2
WARNING!
The vibration level specifi ed in these instruc-
tions has been measured in accableance
with the standardised measuring procedure
specifi ed in EN 60745 and can be used to
make equipment comparisons. The declared
vibration total value may also be used in a
preliminary assessement of exposure.
The vibration level varies in accableance
with the use of the tool and may be higher
than the value specifi ed in these instructions
in some cases. It is easy to underestimate the
vibration load if the electrical power tool is
used regularly in this manner.
NOTE
For an accurate estimate of the vibration load
during a certain working period, the times
during which the appliance is switched off or
is running but not actually being used must
also be taken into consideration. This can
signifi cantly reduce the vibration load over
the total working period.
General Power Tool
Safety Warnings
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of fl am-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded)
power tools. Unmodifi ed plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
IB_35391_PBH1500A1_LB1.indb 19IB_35391_PBH1500A1_LB1.indb 19 28.05.14 16:3528.05.14 16:35
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBH 1500 A1 - IAN 35391 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBH 1500 A1 - IAN 35391 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PBH 1500 A1 - IAN 35391

Parkside PBH 1500 A1 - IAN 35391 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info