Manual Parkside PAS 4 B3 - IAN 303832 (page 8 of 43) (English)

679459

8

Zoom out

Zoom in

Previous page

1/43

Next page

■ 4

│

GB

│

IE

│

NI

│

CY

PAS 4 B3

d) Do not abuse the mains cable. Never use the

cable for carrying, pulling or unplugging the

power tool. Keep mains cable away from heat,

oil, sharp edges or moving parts. Damaged

or entangled cables increase the risk of electric

shock.

e) When working outdoors with an electrical

power tool always use extension cords that

are also suitable for use outdoors. The use

of an extension cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, a hard

hat, or hearing protection, depending on the

type and use of the electric tool, will reduce the

risk of personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying the power

tool with your ﬁnger on the ON/OFF switch or

connecting the power tool to the mains supply

whilst it is switched on can lead to serious ac-

cidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A tool or wrench

attached to a rotating component of the power

tool can cause serious injuries.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. The

use of an extraction system can reduce hazards

caused by dust.

h) Do not allow yourself to get lulled into a false

sense of security and do not ignore the safety

regulations for power tools, even if you are

familiar with the power tool after repeated

use. Careless handling can lead to serious

injuries within a fraction of a second.

4. Power tool use and care

a) Do not overload the power tool. Use the

correct power tool for your application.

The correct power tool will do the job better

and more safely at the rate for which it was

designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or remove a removable battery pack

before making any adjustments, changing

accessories, or storing the power tool. This

precaution is intended to prevent you from

unintentionally starting the device.

d) Store idle power tools out of the reach of

children. Do not allow anyone to operate the

device who is not familiar with the device or

who has not read these instructions. Power

tools are dangerous if used by people who are

inexperienced.

e) Look after power tools and accessories with

care. Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may aﬀect the power

tool's operation. Arrange for damaged

components to be repaired before using the

power tool. Many accidents are caused by

poorly maintained power tools.

1

Transmission from the gearbox to the screwdriver head Submitted on 15-6-2020 at 01:03
Reply Report abuse
I've got a shift lever from the gearbox to the screwdriver's broken head. I want the length of that arm so I can replace it with another one Submitted on 15-6-2020 at 01:01
Reply Report abuse
i just bought this and was good at 1st trial...and than it doest work yet...i"ve charged it but still the same...any help please... Submitted on 14-11-2019 at 00:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Parkside PAS 4 B3 - IAN 303832 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAS 4 B3 - IAN 303832 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PAS 4 B3 - IAN 303832

Parkside PAS 4 B3 - IAN 303832 User Manual - German, Dutch, French - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info