Manual Parkside PAS 4 B3 - IAN 303832 (page 7 of 43) (English)

679459

7

Zoom out

Zoom in

Previous page

1/43

Next page

GB

│

IE

│

NI

│

CY

│

3 ■

PAS 4 B3

OUTPUT:

Rated voltage: 5.0 V

(DC)

Rated current: 1700 mA

Charging time: approx. 1 hr

Protection class: II /

(double insulation)

Noise and vibration data:

The measured values have been determined in

accordance with EN60745. The A-rated noise

level of the tool is typically:

Sound pressure level: L

pA

= 67.8dB (A)

Sound power level: L

WA

= 78.8 dB (A)

Uncertainty K: K

pA/WA

= 3 dB

Vibration values (vector total of three directions)

determined in accordance with EN 60745:

Screws:

Vibration emission value: a

h

= 0.79 m/s

2

Uncertainty: K = 1.5 m/s

2

NOTE

►

The vibration level speciﬁed in these instruc-

tions has been measured in accordance with

a standardised measuring procedure and

can be used for equipment comparisons. The

speciﬁed vibration emission value can also

be used to make an initial exposure estimate.

WARNING!

► The vibration level will vary according to the

use of the power tool and may sometimes

be higher than the value speciﬁed in these

instructions.

Regular use of the power tool in this way may

cause the user to underestimate the vibra-

tion. To estimate the vibration load during a

speciﬁc working period accurately, periods

during which the appliance is switched oﬀ

(or running, but not being used) must also

be taken into account. This can signiﬁcantly

reduce the vibration load over the total work-

ing period.

General Power Tool

Safety Warnings

WARNING!

► Read all safety warnings and all instruc-

tions. Failure to follow the safety information

and instructions may result in electric shock,

ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep your work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmo-

spheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

1

Transmission from the gearbox to the screwdriver head Submitted on 15-6-2020 at 01:03
Reply Report abuse
I've got a shift lever from the gearbox to the screwdriver's broken head. I want the length of that arm so I can replace it with another one Submitted on 15-6-2020 at 01:01
Reply Report abuse
i just bought this and was good at 1st trial...and than it doest work yet...i"ve charged it but still the same...any help please... Submitted on 14-11-2019 at 00:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Parkside PAS 4 B3 - IAN 303832 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAS 4 B3 - IAN 303832 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PAS 4 B3 - IAN 303832

Parkside PAS 4 B3 - IAN 303832 User Manual - German, Dutch, French - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info