796085

Parkside PAKSP 20-Li A1 - IAN 308540 Manual

22
Zoom out
Zoom in
Previous page
1/85
Next page
■ 18 │ GB│IE PAKSP 20-Li A1
■ Use only saw blades specified by the manufacturer which comply with
EN847-1 (intended for cutting wood or similar materials).
■ Use only saw blades marked with a speed equal to or higher than the
speed indicated on the power tool.
Assembly and fastening of tools and tool parts
■ Tools and tool bodies must be clamped so that they cannot come loose
during operation.
■ When mounting the tools, you must ensure that the clamping is carried
out on the tool hub or the clamping surface of the tool and that the
cutting edges do not come into contact with each other or with the
clamping elements.
■ Mounting screws and nuts must be tightened using suitable spanners
etc. and to the torque specified by the manufacturer (9–12 Nm).
■ Extending the spanner or using hammer blows to tighten bolts is not
permitted.
■ All dirt, grease, oil or water must removed from the clamping surfaces.
■ Clamping screws must be tightened according to the manufacturer's
instructions.
■ To adjust the bore diameter of circular saw blades to the spindle diameter
of the machine, use only firmly inserted rings, e.g. rings that are pressed
in or affixed by adhesive bonding. The use of loose rings is not permitted.
Maintenance of tools
■ The maintenance of tools is not permitted. Danger due to imbalance!
Handling
Handle tools safely to avoid injury:
■ Wear personal protective equipment, especially protective gloves.
■ Make sure that you have secure footing.
■ Always wear closely fitting clothing.
■ After you have fitted the tool, re-attach all of machine's safety devices,
if any, correctly.
■ Have an expert carry out a test run.
Icons
Wear protective gloves!
Wear a dust mask!
Wear safety goggles!
Wear ear muffs!
Attention! Risk of injury!
Do not reach towards the running saw blade!
2
1
1. Set the adjustable fence 3.
2. Set the bevel angle.
WARNING!
► The power tool creates an electromagnetic field during operation. This
field can, in certain circumstances, impair active or passive medical
implants.
To reduce the risk of serious or fatal injury, we recommend that individ-
uals with medical implants consult their physician and the manufacturer
of the medical implant before operating the power tool.
Safety guidelines for battery chargers
■ This appliance may be used by children aged 8 years
and above and by persons with limited physical,
sensory or mental capabilities or lack of experience
and knowledge, provided that they are under super-
vision or have been told how to use the appliance
safely and are aware of the potential risks. Do not
allow children to use the appliance as a toy. Cleaning
and user maintenance tasks may not be carried out
by children unless they are supervised.
■ To avoid potential risks, if the mains cable of this
appliance is damaged, it must be replaced by the
manufacturer, its customer service department or a
similarly qualified person.
The charger is suitable for indoor use only.
ATTENTION!
♦ This charger can only charge the following batteries:
PAP 20 A1/PAP 20 A2/PAP 20 A3.
♦ A current list of battery compatibility can be found at
www.Lidl.de/Akku.
WARNING!
■ Do not operate the appliance with a damaged cable, power cord or
mains plug. Damaged power cords can result in danger to life due to
electric shock.
Original accessories/attachments
Use only the accessories and additional equipment that are specified in
the operating instructions and are compatible with the appliance.
WARNING!
■ Do not use any accessories that are not recommended by PARKSIDE.
This can lead to an electric shock and fire.
Before use
Charging the battery pack
CAUTION!
► Always unplug the appliance before you remove the battery pack5
from or connect the battery pack to the battery charger.
NOTE
► Never charge the battery pack if the ambient temperature is below
10°C or above 40°C. If a lithium-ion battery is to be stored for an
extended period, the charge level should be checked regularly. The
optimum charge level is between 50% and 80%. The storage climate
should be cool and dry, and the ambient temperature should be
between 0°C and 50°C.
♦ Insert the battery pack 5 into the battery charger .
♦ Insert the power plug into the socket. The red control LED * lights up.
♦ The green control LED ) indicates that the charging process is complete
and the battery pack 5 is ready for use.
♦ Always unplug the appliance before you remove the battery pack5
from the battery charger.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAKSP 20-Li A1 - IAN 308540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAKSP 20-Li A1 - IAN 308540 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info