722849

Parkside PAHE 20-Li A1 - IAN 315261 Manual

34
Zoom out
Zoom in
Previous page
1/141
Next page
■ 30 
│
 GB
│
IE
PAHE 20-Li A1
Checking the battery charge level
♦ Press the battery charge level button
to check the status of the battery. The status/
remaining charge will be shown on the battery
display LED
as follows:
♦ RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Fixing/attaching the shoulder strap
♦ Hook the shoulder strap into the carrying
lug .
♦ Adjust the length of the shoulder strap to
your size so that carrying lug is at hip height
when hooked in place.
♦ In addition, you can adjust the height of the
carrying lug on the appliance shaft by
loosening the screw.
Mounting the saw chain and blade
WARNING!
► Wear protective gloves! There is a danger
of injury from the sharp cutting teeth!
► The sprocket cover
together with the chain
tensioning ring
and the fixing screw
are not pre-assembled on the appliance at
delivery.
► The turning of the blade
is not intended by
the manufacturer.
► The chain travel direction
on the blade
must be adhered to every assembly.
♦ Place the saw chain
on the blade .
Ensure that the saw chain is running in
the correct direction.
♦ Attach the blade
with the labelling facing
upwards and guide the saw chain
around
the chain sprocket
.
The guide rail must be above the blade
guide .
♦ Put the sprocket cover
on.
♦ Tighten the fixing screw
slightly.
♦ Now, tighten the saw chain
(see section
Tightening and checking the saw chain).
♦ Tighten the fixing screw
completely.
Tightening and checking the saw
chain
WARNING!
► Wear protective gloves! There is a danger of
injury from the sharp cutting teeth!
♦ Undo the fixing screw
.
♦ Turn the chain tensioning ring
in a clockwise
direction to increase the tension.
♦ The saw chain
must lie against the underside
of the blade.
Check whether the saw chain can be drawn
over the blade by hand .
♦ Now tighten the fixing screw
completely.
NOTE
► A new saw chain
stretches and must be
tightened more regularly.
Lubricating the chain
♦ Remove the oil filler cap .
♦ Fill the oil tank with approx. 65ml of organic
chain oil
.
WARNING!
► Never work without chain lubrication!
If the saw chain
runs dry, the cutting
equipment may become irreparably dam-
aged within a short time. Always check chain
lubrication and oil level in the tank before
starting work.
NOTE
► Use only saw chain oil. Preferably biodegrad-
able. Do not use waste oil, motor oil, etc.
► While working, check whether the automatic
chain lubrication is working correctly. Check
the chain lubricator before and during work.
… 34 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pahe-20-li-a1---ian-315261

Reset search

  • I have a PAHE 20-LI A1 rechargeable pruner. the electric motor is faulty. where can I request a replacement? my email is plalazza@libero.it
    Thank you Submitted on 26-3-2024 at 20:48

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAHE 20-Li A1 - IAN 315261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAHE 20-Li A1 - IAN 315261 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info