Manual Parkside PABSW 10.8 A1 - IAN 86583 (page 74 of 82) (English, German, Dutch, French, Italian)

722879

Zoom out

Zoom in

1/82

- 74 -

7.2 Torque setting (Fig. 4 / Item 1)

The cordless screwdriver is ﬁ tted with a mechani-

cal torque selector.

The torque for a speciﬁ c size of screw is selected

with the set-collar (1). The correct torque depends

on several factors:

•

on the type and hardness of material in ques-

tion

•

on the type and length screws used

•

on the requirements needing to be met by the

screwed joint.

The clutch disengages with a grating sound to in-

dicate when the set torque is reached.

Important! The tool must be at a standstill

when you set the torque with the setting

ring.

7.3 Drilling (Fig. 4 / Item 1)

For drilling purposes, move the set-collar to the

last step „Drill“. In this setting the slip clutch is in-

active. The maximum torque is available in drilling

mode.

7.4 Selecting 1st gear to 2nd gear

(Fig. 4/Item 2)

By adjusting the selector switch, you can work

with a faster or slower turning speed. Change

the gear only when the drill is at a standstill. If

you fail to observe this point, the gearing may be

damaged.

7.5 Battery capacity indicator

(Fig. 4/Item. 3)

Press the button for the battery capacity indicator

(a). The battery capacity indicator (3) indicates

the charge state of the battery on 3 coloured

LEDs.

7.6 Forward/Reverse switch

(Fig. 5 / Item 4)

With the slide switch above the On/Off switch

you can select the direction of rotation of the

battery-powered drill/screwdriver and secure it

against being switched on accidentally. You can

choose between clockwise and anticlockwise

rotation. To avoid causing damage to the gearing

it is advisable to change the direction of rotation

only when the tool is at a standstill. The On/Off

switch is blocked when the slide switch is in centre

position.

7.7 On/Off switch (Fig. 5 / Item 7)

Inﬁ nitely variable speed control is possible with

the On/Off switch. The further you press the

switch, the higher the speed of the battery-powe-

red drill/screwdriver.

7.8 LED lamp (Fig. 5/Item 8)

The LED lamp (8) can be used in poor lighting

conditions to illuminate the area where you want

to drill or screw. The LED lamp (8) will be lit au-

tomatically as soon as you press the ON/OFF

switch (7).

7.9 Changing the tool (Fig. 6)

Important. Set the changeover switch (4) to its

centre position whenever you carry out any work

(for example changing the tool, maintenance

work, etc.) on the cordless screwdriver.

•

The cordless screwdriver is fitted with a quick-

action chuck (10) with an automatic spindle

stop.

•

Open the chuck (10). The chuck opening (b)

must be large enough to hold the tool (drill bit

or screwdriver bit).

•

Select the suitable tool. Push the tool as far as

possible into the chuck opening (b).

•

Tighten the chuck (10) and then check that the

tool is secure.

7.10 Screwdriving

We recommend using self-centering screws (e.g.

Torx screws, recessed head screws) designed for

reliable working. Be sure to use a bit that matches

the screw in shape and size. Set the torque, as de-

scribed elsewhere in these operating instructions,

to suit the size of screw.

7.11 Integrated magnetic bit mount

(Fig. 7-8)

The cordless drill/screwdriver has an integrated

magnetic bit mount (9) for 1/4-inch (6.35mm) bit

inserts.

Anl_4513640.indb 74Anl_4513640.indb 74 27.11.12 13:4927.11.12 13:49

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSW 10.8 A1 - IAN 86583 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PABSW 10.8 A1 - IAN 86583 Manual

Product: