464975
10
Zoom out
Zoom in
Previous page
1/11
Next page
8 UK
í Switching on the device
Press the ON/OFF switch
W
into setting “I”.
Note: The device will not start its working action
until it is in contact with the material.
í Switching off the device
Press the ON/OFF switch
W
into setting “0”.
í Preselecting the speed
The wheel
Q
allows you control of the speed over
the full range available.
Setting 1 = slowest speed, e.g. for detailed
or precise tasks
Setting MAX. = fastest speed, for removing
material quickly
Note: The optimum speed depends on the material
and the surface to be worked. It is best determined
by a short practical test. Always begin by using the
slowest speed setting. If you fi nd that you are not
removing enough material, increase the speed by
one setting.
í Advice on use
½ Warning! Always pull out the mains plug from
the socket:
- when you are no longer using the device
- when taking a break from your work
- before changing the tool attachment
- before cleaning the device
Caution! Keep other people out of your work-
ing area.
½ Always hold the workpiece fi rmly with both
hands (see Fig. B) and always work away from
your body.
½ Guide the switched on device slowly with
the tool attachment up to the material to be
worked or surface to be stripped. The device
will not begin its working action until it makes
contact with the material to be worked. This
allows you to position the tool exactly.
½ Begin at the fl attest possible angle and lightest
pressure.
½ Note that if you press on to backgrounds like
tiles, wood or plaster too hard you could dam-
age them.
½ The device and the tool attachment heat up
if used for long periods. Do not overload the
device and let it cool between sessions.
í Resharpening tool attachments
Your tools must be sharp to achieve the best
results. You should therefore resharpen or regrind
them at the right time.
There are two ways of sharpening your tools:
1. with a bench grinder
(e.g. Parkside PDS 200):
½ Rotate the electric scraper/carver with an
inserted tool attachment through 180°.
½ Attention! Do not switch on the electric
scraper/carver.
˽ Make sure that no blue colour (annealed
colour) appears on the cutting edge during
resharpening, otherwise the hardness can be
adversely affected.
2. with a belt sander
(e.g. Parkside PEBS 900):
½ Mount the belt sander in a suitable stationary
holding device.
½ Rotate the electric scraper/carver with an
inserted tool attachment through 180°.
½ Attention! Do not switch on the electric
scraper/carver.
˽ Pay attention to the direction of motion of the
belt sander when resharpening.
First Use
Manual_UK_Inhalt.indd 8Manual_UK_Inhalt.indd 8 30.06.2005 10:26:59 Uhr30.06.2005 10:26:59 Uhr
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3113 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside KH 3113

Parkside KH 3113 User Manual - German - 11 pages

Parkside KH 3113 User Manual - Dutch, French, Italian - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info