Manual Parkside IAN 96229 PABSW 10.8 B2 (page 43 of 52) (French)

745187

Zoom out

Zoom in

1/52

red-yellow-green =Battery fully charged

red and yellow =Battery half charged

red =Battery needs to be charged

Operation

1. Choice of gear

Slide the gear selector

(4) to LO or HI, corresponding to a low

or high torque selection.

A gear change may only be

performed in standstill mode!

2. Direction switch

You can toggle between right and left ro-

tation by pushing the direction of rotation

switch ( 5).

If you move the direction switch ( 5) to

the middle position, the device is secured

against being switched on.

The direction changed may

only be performed in stand-

still mode!

3. Torque adjustment

You can preset the maximum torque by

rotating the torque adjustment ring ( 3)

17+1 torque levels are provided. At the

last level, the maximum torque is available.

This position is especially suitable for dril-

ling, so it is also marked with a drill icon.

Reaching the preset torque limit produces

a noticeable rasping sound. This sound is

caused by the slip clutch.

Torque adjustment should

only be performed in stand-

still mode!

4. Keyless drill chuck

removal

To use the bitholder (17), you must remove

the keyless chuck (1).

Hold the keyless chuck (1) rmly from the

front and pull or push the Chuck ring (2)

against the keyless chuck (1) in the direc-

tion of the arrow mark „Unlock“ on the

Chuck ring (2). This unlocks the keyless

chuck (1) and it can be pulled forward.

To set the keyless chuck again, pull it onto

the bitholder (17) until you can push it over

completely. Lock the keyless chuck (1) with

the Chuck ring (2). To do this, push or pull

the Chuck ring (2) in the direction of the

arrow mark „Lock“ on the Chuck ring (2).

5. Tool change

Rotate the keyless chuck (1) counter-clock-

wise, until the drill chuck aperture is large

enough to accommodate the tool.

Push the tool as far as possible into the

keyless chuck (1) and rotate the chuck

clockwise to clamp the tool rmly.

To remove the tool again, rotate the keyless

chuck (1) and pull out the tool.

6. Using the bitholder

After removing the keyless chuck (1) you can

use the bitholder.

Insert a suitable 6-point bit in the bitholder

(17). Because of the 6-point bit holder, it may

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 96229 PABSW 10.8 B2 in the language / languages: French as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 96229 PABSW 10.8 B2

Parkside IAN 96229 PABSW 10.8 B2 User Manual - English, German, Dutch - 52 pages

Parkside IAN 96229 PABSW 10.8 B2 User Manual - Italian, Portuguese, Spanish - 80 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 96229 PABSW 10.8 B2 Manual

Product: