Manual Parkside IAN 96229 PABSW 10.8 B2 (page 41 of 52) (French)

745187

Zoom out

Zoom in

1/52

• Avoid mechanical damage to the

charger. This can result in internal short

circuits.

• Do not operate the charger on a

combustible surface (e.g. paper,

textiles). Risk of re due to heating dur-

ing charging.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent of

the same or a similarly qualied person in

order to prevent hazards.

• The battery of the appliance is not fully

charged at the time of delivery. It there-

fore needs to be fully recharged before

you use it for the rst time. For the rst

recharge cycle we recommend that you

charge the battery for about 1 hour. Slot

the battery into the base and plug the bat-

tery charger into a mains outlet.

• When the battery is fully charged, unplug

the charger from the mains and from the

appliance. Charging time is approx. 1

hour.

• Do not charge the battery continuously

since this may damage the battery cells.

Note: Repeatedly charging small capaci-

ties may damage the battery cells. Re-

charge the battery only if the appliance is

becoming slow.

• Do not use the charger to charge non-

rechargeable batteries.

9) RESIDUAL RISKS

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this electric

tool may present the following hazards:

a) Cuts

b) Ear damage if working without ear pro-

tection.

c) Damage to your health caused by swing-

ing your hands and arms when operating

the appliance for longer periods of time

or if the unit is not held or maintained

properly.

Warning! During operation, this elec-

tric tool generates an electromagnetic

eld which, under certain circum-

stances, may impair the functionality

of active or passive medical implants.

To reduce the risk of serious or lethal

injuries, we recommend that persons

with medical implants consult their

doctor and the manufacturer of their

medical implant before operating the

machine.

Charging the battery

Do not expose the battery to

extreme conditions such as

heat or impact. Risk of injury

from escaping electrolytic so-

lution! After eye/skin contact,

rinse the affected areas with

water or a neutraliser and

consult a doctor.

Charge the battery in a dry room

only.

Prior to attaching the charger, check

that the battery‘s outer surface is

clean and dry.

There is a risk of injury due to elec-

tric shock.

Only use the original charger from

the package to charge the battery.

Mind not to charge the appliance

for more than 5 hours at a time. If

you do, the battery and the appli-

ance may be damaged and longer

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 96229 PABSW 10.8 B2 in the language / languages: French as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 96229 PABSW 10.8 B2

Parkside IAN 96229 PABSW 10.8 B2 User Manual - English, German, Dutch - 52 pages

Parkside IAN 96229 PABSW 10.8 B2 User Manual - Italian, Portuguese, Spanish - 80 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 96229 PABSW 10.8 B2 Manual

Product: