Manual Parkside IAN 89068 PABK 60 A1 (page 37 of 44) (English, German, Dutch, French)

745084

Zoom out

Zoom in

1/44

37 GB

Introduction / General safety instructions for compressed air tools

Note: This package also includes six diﬀerent col-

ours of highly concentrated, water-soluble paints in

plastic containers as well as a beaker of thinner

(transparent). These are referred to as „consuma-

bles“ in the following.

Technical data

Output power: approx. 15 l / min

Theoretical suction capacity: max. 40 l / min

Operating pressure: max. 0.26 MPa

Max. pressure: 0.32 MPa (approx.

3 bar)

Weight without accessories: 4.175 kg

Motor output

without load: 300 W

Operating voltage: 230 V∼, 50 Hz

Operating mode: S3 15 %

Operating time 10 min:

S3 = Intermittent periodic duty not inﬂuenced by

the starting process. During a 10 min period, the

operating time must not exceed 15 % (1.5 min).

Output of

compressor speed: 1440 min

-1

Protection class: IPX 0

Protection class: I /

Ambient temperature

during operation: 10°C–30 °C

General safety instructions

for compressed air tools

Note: When used in the following text, the terms

„compressed air device“ or „device“ refer to the

compressed air device speciﬁed in these instructions

for use.

Basic safety measures must be

followed when using compressed air devices to

eliminate the risk of ﬁre, electric shock and personal

injury. Be sure to read and follow the notices within

these operating instructions prior to using the device

and store them in a safe location. The manufacturer

assumes no liability for damages or personal injury

resulting from failure to follow these operating in-

structions.

Children or persons who lack the knowledge

or experience to use the device or whose phys-

ical, sensory or intellectual capacities are lim-

ited must never be allowed to use the device

without supervision or instruction by a person

responsible for their safety.

Prevent children from playing with the device.

RISK OF INJURY! Before

performing maintenance tasks, disconnect the

compressed air supply.

Only use the device in applications for which it

was designed!

Do not overload the device.

Never use hydrogen, oxygen, car-

bon dioxide or other bottled gasses

to power this tool as doing so may

result in explosion, causing severe injuries.

Maintain and clean the device regularly as

prescribed (see Chapter „Cleaning and care“).

DANGER OF EXPLOSION!

Never use petrol or other ﬂammable liquids to

clean the compressed air tool! Sparks could ig-

nite residual vapours inside the compressed air

device resulting in the compressed air device

exploding. Do not use the device in explosive

environments with ﬂammable liquids, gasses or

dust. Never work on materials which are or could

potentially be highly ﬂammable or explosive.

Check the device for damage before bringing

it into use. Always make sure that the device is

in perfect condition each time before use.

Remain alert at all times and always watch

what you are doing! Unexpected movement of

the device may cause hazards.

Avoid placing your body in an unnatural position.

Keep proper footing and balance at all times.

By doing this you will be in a better position to

control the compressed air device in unforeseen

circumstances.

Do not use any device if its switch is defective.

A device that can no longer be switched on

and oﬀ is dangerous and must be repaired.

Store the device out of the reach of children

when it is not in use. Do not let anyone use the

device if he or she is not familiar with it or has

not read the instructions and advice. Compressed

air devices are dangerous when they are used

by inexperienced people.

Introduction

89068_par_Airbrush_Set_Content_LB2.indd 37 04.06.13 09:56

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89068 PABK 60 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 89068 PABK 60 A1 Manual

Product: