745096

Parkside IAN 85052 PSE 2800 B2 Manual

33
Zoom out
Zoom in
Previous page
1/41
Next page
33 GB
Safety Information
Safety Information / Before starting the equipment / Operation
Consumption at 2/3 load: approx. 1.36 l/h
Weight: 42 kg
LpA sound pressure level: 74,2 dB(A)
Uncertainty K: 2 dB(A)
LWA sound power level 96 dB(A)
K uncertainty: 2,3 dB(A)
Power factor cos ϕ: 1
Power class: G1
Max. temperature: 40°C
Max. altitude (above
mean sea level):
1,000 m
Spark plug: LD F6TC
Operating mode S1 (continuous operation)
The equipment can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The equipment may be temporarily operated with
the quoted power output 2 min.
Before starting the equipment
Assembly
The installation of the equipment requires
two open-ended wrenches (size 12).
Assemble all parts before filling in fuel and oil
in order to prevent the fluids from leaking out.
Assemble the foot
16
, wheels
14
and push
bar
18
as shown in Figures E - H.
To mount the wheels, first slide the axle
15
through the mountings on the bottom of the
generator and fit the wheels
14
as shown on
Figure F.
Electrical safety
J Electric supply cables and connected equipment
must be in perfect condition.
J The generator is to be operated only with
equipment whose voltage specifications conform
to the generator’s output voltage.
J Never connect the generator to the power
supply (socket-outlet).
J Keep the cable length to the consumer as short
as possible.
Environmental protection
Dispose of soiled maintenance material and
operating materials at the appropriate collection
point.
Recycle packaging material, metal and plastics.
Connecting to earth
The housing must be connected to earth in
order to discharge static electricity. To do this,
connect one end of a cable to the earth con-
nection
4
on the generator (Fig. B) and the
other end to an external earth.
Operation
IMPORTANT! You must fill up with engine oil
(approx. 0.6 l) and fuel before you can start the
engine.
Check the fuel level and engine
oil level, refill if
necessary by topping up the oil though the oil
fille
r screw
7
and the petrol through the petrol
filler cap
2
.
Make sure that the generator has sufficient
ventilation.
Make sure that the ignition cable is secured to
the spark plug.
Inspect the immediate vicinity of the generator.
Disconnect any electrical equipment which
may already be connected to the generator.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 85052 PSE 2800 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 85052 PSE 2800 B2 in the language / languages: French as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 85052 PSE 2800 B2

Parkside IAN 85052 PSE 2800 B2 User Manual - English, German, Dutch - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info