Manual Parkside IAN 68915 PSTK 730 A1 (page 41 of 55) (English, Italian, Portuguese, Spanish)

744913

Zoom out

Zoom in

1/55

41 GB/MT

Slide the guide fence

into the fence guide

openings

Retighten the two locking screws.

Connecting the vacuum

sawdust extraction device

Insert the dust extraction spout

into the

vacuum extraction duct

until it engages.

Connect a vacuum device approved for the

extraction of sawdust and splinters to the dust

extraction spout

(see Fig. C).

Operation

Setting the cutting angle

Release the clamp screw

using the Allen

key

Set the cutting angle 0° / 15° / 30° / 45°

(left / right) on the base plate

. The embossed

marking for each recessed line indicates the

cutting angle setting. The housing has a stop

(see Fig. B) which must engage in the

appropriate recessed line.

Tighten the clamp screw

using the Allen

key

Setting the speed



Set the desired speed using the oscillation

speed setting wheel

If possible always determine the optimum setting

beforehand by carrying out a practical test.

Setting the pendulum action

You can set the pendulum movement of the saw

blade

using the pendulum action switch

. By

having no pendulum action (setting “0”) you can

produce ﬁne, clean cut edges. Turn oﬀ the

pendulum action for thin workpieces.

With the pendulum action activated (settings 1–3)

you can cut through the workpiece at increasingly

quicker rates.

If possible always determine the optimum set-

ting beforehand using a practical test.

Switching On / Oﬀ

Before connecting to the mains plug check that

the mains circuit supplies 230 V∼ 50 Hz and is ﬁtted

with a 16 A fuse or cut-out in accordance with the

regulations!

Switching on:

Push the ON / OFF switch

into position “I”

and ensure it engages.

Switching off:

Press the rear part of the ON / OFF switch

Maintenance and cleaning

Maintenance

Replace the saw blade

as soon as its teeth

become blunt and it starts to produce defective

saw cuts.

Cleaning

Carry out that cleaning of the device when you

have ﬁnished sawing.

Preparing for use / Operation / Maintenance and cleaning

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 68915 PSTK 730 A1 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 68915 PSTK 730 A1

Parkside IAN 68915 PSTK 730 A1 User Manual - German, Dutch, French - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 68915 PSTK 730 A1 Manual

Product: