744913
39
Zoom out
Zoom in
Previous page
1/55
Next page
39 GB/MT
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
and advice. Electrical power tools are danger-
ous when they are used by inexperienced peo
ple.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand. The use of electrical
power tools for purposes other than those in-
tended can lead to dangerous situations.
Safety advice relating
specifically to this device
Hold the electrical power tool by the
insulated handle surfaces when you
are undertaking work where there is
the danger of the attachment striking
hidden electricity cables or the device’s
mains lead. Contact with a live wire could
cause metal parts of the device to become live
and lead to electric shock.
Securely support the workpiece. Use clamps or
a vice to grip the workpiece firmly. This is much
safer than holding it in your hand.
Always switch on the electrical power tool be-
fore placing it against the workpiece. There is
also the risk of kickback.
Keep you hands away from the area of the
saw blade. Do not grip the underside of the
workpiece. Contact with the saw blade
14
may result in the risk of injury.
Make sure that the base plate
9
lies on the
workpiece when sawing.
Always work with the mains lead leading away
from the rear of the device.
POISONOUS DUSTS! Working with harm-
ful / noxious dusts represents a risk to the health
of the person operating the device and to any-
one near the work area.
Wear a dust mask!
Do not saw materials containing substances
harmful to health.
Do not saw materials containing asbestos.
Asbestos is a known carcinogen.
When sawing wood and in particular when
working on materials that give rise to dusts that
are hazardous to health, the device must be
connected to a suitable dust extraction device.
Make sure you have adequate ventilation.
Do not work on moistened materials or damp
surfaces.
Switch off the electrical power tool after com-
pleting each stage of work but do not withdraw
the saw blade
14
from the cut until after it has
come to a standstill.
After switching off do not brake the saw blade
14
by pressing it sideways against an object. It
could cause the saw blade
14
to be damaged,
break or initiate a kickback.
Use only undamaged, defect-free saw blades.
Distorted or blunt saw blades can break or
cause a kickback.
Always keep the device clean, dry and free of
oil or grease.
General safety advice for electrical power tools
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 68915 PSTK 730 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 68915 PSTK 730 A1 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 68915 PSTK 730 A1

Parkside IAN 68915 PSTK 730 A1 User Manual - German, Dutch, French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info