744927
54
Zoom out
Zoom in
Previous page
1/70
Next page
54 GB/MT
Connect the device to the power supply by
inserting the mains plug into the socket.
Press down the ON / OFF switch
2
and then
move it in direction of the rotational speed con-
trol
1
. Then set the rotational speed control to
a position between “5” and “20”.
Switching off:
Set the rotational speed control
1
to position
“5”. Press down the ON / OFF switch
2
and
then move it in direction of the cable.
Q
Advice on working with
materials / Tools / Speed ranges
Use the highest speed when working on steel
or iron with the milling bits
20
.
Use a short trial on a test piece to determine the
optimum rotational speed range for working on
zinc, zinc alloy, aluminium, copper and lead.
Use the low speed range for working on plastics
and low-melting point materials.
Use high speeds on wood.
Use the medium speed range for cleaning,
polishing and buffing.
The following information shall be considered as
recommendatory only. Learn by practical experience
which tools and settings are the best for the materi-
als you work with.
Setting the appropriate speed:
Numeral on the
rotational speed
control
1
Material to be
worked on
5
Plastics and low melting
point materials
8
Stone, Ceramics
12
Softwood, metal
16
Hardwood
20
Steel
Examples of appropriate tool selection
Function:
Function Accessory Application
Drilling
HSS drill
12
Drilling wood
Milling Milling bits
20
Various tasks, e.g.
hollowing out,
gouging, shaping,
grooving or slotting
Engraving Engraving
bits
21
Making marks,
craft projects
(see Fig. D)
Polishing,
derusting
CAUTION!
Use only the
lightest con-
tact pressure
of the tool on
the work-
piece.
Metal brush
16
Derusting
Polishing
wheel
14
Working on vari-
ous metals and
plastics, in particu-
lar noble metals
like gold or silver
(see Fig. E)
Cleaning Plastic brush
19
E.g. cleaning com-
plex plastic hous-
ings or the area
around a door lock
Grinding Grinding
wheels
15
,
grinding bits
22
Grinding work on
stone, wood; fine
work on hard mate-
rials such as ceram
ic
or alloyed steel
(see Figs. F, G)
Cutting and
sawing
Cutting discs
17
Cutting metal,
plastic or wood
Q
Tips and tricks
If you use press too hard you run the risk of break-
ing the tool or damaging the workpiece. You will
achieve the best results by operating the tool at a
constant rotational speed and using a low contact
pressure on the workpiece.
Maintenance and cleaning / Service / Warranty / DisposalOperation
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 66445 PMGS 12 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 66445 PMGS 12 A1 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 66445 PMGS 12 A1

Parkside IAN 66445 PMGS 12 A1 User Manual - German, Dutch, French, Italian - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info