744938
31
Zoom out
Zoom in
Previous page
1/45
Next page
31 GB/MT
Nominal rotation speed: 1500 rpm
For drill bits of diameter: 3 10 mm
Protection class:
Noise data:
Refers to A-weighted sound level.
Sound pressure level: 75.30 dB (A)
Sound level: 85.00 dB (A)
Values determined in accordance with EN 61029.
General safety advice
CAUTION! In order to protect yourself from
the danger of electric shock, injury or fire when
using electrical power tools, please observe
the following basic safety precautions. Read all
these requirements before you use the electrical
power tool, and keep the safety advice in a
safe place.
Working safely
1. K
eep your working area clean and tid
y.
A disorderly working area can lead to accidents.
2. Be aware of the effects of the
environment.
Do not leave electrical power tools out in the rain.
Do not use electrical power tools in moist or
wet surroundings.
Ensure that your working area is well lit.
Do not use electrical power tools in
areas where there is risk of fire or
explosion.
3.
Protect yourself from electric
shock.
Avoid touching earthed objects such as pipes,
heating radiators, ovens or refrigerators with
parts of your body.
4. Keep other people at a safe distance.
Do not allow other people, in partic-
ular children, to touch the electrical
power tool or the mains lead. Keep
them away from your working area.
5. Store currently unused electrical power
tools in a safe place.
When not being used electrical power tools
should be stored in dry conditions in a high or
enclosed place, out of reach of children.
6. Do not overload your electrical power
tool.
By keeping within the specified working range
of the tool you will work more safely and achieve
a better result.
7. Use the right electrical power tool for
the task.
Do not use low-output devices for heavy tasks.
Do not use an electrical power tool for purposes
for which it was not intended. For example, do
not use a hand operated circular saw for trim-
ming tree branches or cutting logs.
8. Wear suitable clothing.
Do not wear loose-fitting clothing or jewellery.
They could become caught on moving parts.
We recommend that you wear anti-slip footwear
when working outdoors.
If you have long hair, wear a hair net.
9.
Use personal protective
equipment.
Wear protective glasses.
Wear a dust mask if your work generates dust.
10. Attaching the vacuum dust extraction
device.
Where there are connection points provided
for vacuum dust extraction please ensure that
the connections are made and used properly.
11.
Do not use the mains lead
for purposes for which it
was not intended.
Do not use the mains lead to pull the plug out
of the mains socket. Protect the mains lead
from heat, oil and sharp edges.
12. Securely support the workpiece.
Use clamps or a vice to grip the workpiece firmly.
This is much safer than holding it with your hand.
13. Avoid placing your body in an
unnatural position.
Keep proper footing and balance at all times.
14. Look after your tools carefully.
Keep cutting tools sharp and clean. This way
you will work more safely and achieve better
results.
Introduction / General safety advice
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 61094 PBSG 55 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 61094 PBSG 55 A1 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 61094 PBSG 55 A1

Parkside IAN 61094 PBSG 55 A1 User Manual - German, Dutch, French, Italian - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info