744829
36
Zoom out
Zoom in
Previous page
1/46
Next page
34 GB/MT
priate for the demands on and condition of your
paintwork. Heavily oxidised paintwork will require
the use of a special cleaner. For this use a combined
product (cleaner + wax).
1. Place the car polisher on the surface to be pol-
ished.
Note: To avoid the splattering of wax or polish,
do not switch the appliance on yet. Dab the
appliance a few times at various points on the
area to be buffed. In this way you can ensure
that excess wax / polish is once more distributed
evenly over the terrycloth bonnet and the area
to be buffed.
2. Take both appliance grips
1
firmly in your
hands and switch the appliance on by pressing
the ON / OFF switch
3
(see also Fig. B).
3. Guide the waxer/polisher evenly over the
paintwork (see Fig. C).
Note: Do not press on the waxer /polisher!
The self-weight of the car polisher alone
applies sufficient pressure for the waxing / pol-
ishing process.
4. Switch the appliance off before you remove it
from the area being buffed. To do this, release
the ON / OFF switch
3
.
j Any difficult to reach corners or recesses may
have to be completed later by hand. Take the
terry bonnet
5
off the car polisher and use
the bonnet for the corners and recesses.
Q
Polishing or removing wax with
the synthetic polishing bonnet
Note: The wax / polish must be allowed to dry on
sufficiently to produce the best polishing performance.
Otherwise any polish that is still fluid will be smeared
by the polishing bonnet.
j Use the synthetic polishing bonnet
6
for final
polishing or removing the wax.
j When working, always follow the instructions
for use of the wax / polish.
Q
Cleaning and Maintenance
WARNING!
DANGER OF INJURY!
Switch
the device off and pull the plug out of the
mains socket
before carrying out any work on the device.
CAUTION! Ensure that no fluids can permeate into
the appliance, this could lead to the destruction of
the product.
The appliance is maintenance-free.
j Use a slightly moist cloth to clean the housing,
if necessary with a mild detergent.
j When cleaning the housing, under no circum-
stances should you use strong detergents,
solvents or abrasives.
j Clean the bonnet by washing by hand in
soapy water.
Q
Service centre
J
WARNING!
Have your device re-
paired only by qualified specialist
personnel using original manufactur-
er parts only. This will ensure that your de-
vice remains safe to use.
J
WARNING!
If the plug or mains
lead
needs to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will en-
sure that your device remains safe to use.
Q
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
Operation / Cleaning and Maintenance / Service centre / Warranty
58811_par_Poliermaschine_Content_LB5.indd 34 16.11.10 13:07
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 58811 PWP 90 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 58811 PWP 90 A1 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 58811 PWP 90 A1

Parkside IAN 58811 PWP 90 A1 User Manual - German, Dutch, French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info