744829
35
Zoom out
Zoom in
Previous page
1/46
Next page
33 GB/MT
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand. The use of electrical
power tools for purposes other than those in-
tended can lead to dangerous situations.
Safety advice for
car polisher
Avoiding the danger of injury, fire and
damage to your health:
J Always pull the plug out of the mains socket
before cleaning or maintaining the device.
J Ensure that the bonnet is well secured to the
buffing plate.
J Do not touch any rotating parts!
Before switching on check to ensure that the
buffing plate is not blocked and can start up
without problem.
J Check to ensure that the bonnet and the buffing
plate are complete and undamaged. Immedi-
ately exchange torn or damaged bonnets /
buffing plates.
J Wait until the polishing disc is flat on the surface
to be polished before switching on the waxer /
polisher.
J Do not use any abrasives; these can destroy
the paint finish.
Q
Original ancillaries /
accessories
J Use only the ancillaries and accessories
that are detailed in the operating in-
structions. The use of parts other than those
recommended in the operating instructions, or
other accessories, can put you at risk of injury.
Q
Understood everything?
J When you have become familiar with these
general safety instruction for electrical appli-
ances, and, with the help of the appropriate
operating instructions, know all about the func-
tions and handling of your electrical appliance,
then you can start working with it. You will
work at your safest only with careful attention
to all of the declarations and instructions of the
manufacturer.
Q
Operation
Q
Placing the bonnet on the
buffing plate
1. Turn the car polisher over so that the polishing
disc
2
is pointing upwards.
2. Place the bonnet
5
6
over the buffing
plate
2
. Ensure that the bonnet
5
6
is placed
centrally and taughtly onto the buffing plate.
Q
Applying wax / polish
with the terry bonnet
1. Always use high quality products for waxing.
j Follow the working methods given on the
packaging.
2. Apply the wax / polish directly on the working
surface of the terry bonnet
5
.
j Spread the wax / polish so that it forms a thin,
even, complete coating over the terry bonnet
5
.
Note: Too much wax does not necessarily
achieve a better finish and you will have to
spent more time later removing the coating.
3. Spread the wax evenly right up to the edge of
the terry bonnet
5
.
Q
Switching on the device and
waxing / polishing the paintwork
Note: The paintwork to be polished must be care-
fully cleaned and completely dry. If necessary, use
a paintwork cleaner. Use products that are appro-
General safety advice for electrical power tools / Operation
58811_par_Poliermaschine_Content_LB5.indd 33 16.11.10 13:07
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 58811 PWP 90 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 58811 PWP 90 A1 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 58811 PWP 90 A1

Parkside IAN 58811 PWP 90 A1 User Manual - German, Dutch, French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info