Manual Parkside IAN 55728 PTS 480 A1 (page 30 of 34) (English, German, Dutch)

745199

Zoom out

Zoom in

1/34

30 GB

General safety advice for electrical power tools

blade. Big boards can bend through due to their

own weight. Boards must be supported on both

sides, at the outside and near the cutting edge.

e) Do not use blunt or damaged saw

blades. Saw blades with blunt or wrongly set

teeth cause increased friction, jamming of the

blade and kickback due to a saw gap that is

too tight.

f) Tighten the adjustments for cutting

depth and cutting angle before start-

ing to cut. If the adjustments change during

cutting, the saw blade can jam and cause a

kickback.

g) Take particular care, when plunge

cutting into existing walls or other

areas that you cannot inspect. The saw

blade can jam when cutting into hidden objects

and thereby causing a kickback.

Safety instructions for

plunge saws

a) Before every use check that the safe-

ty cover closes without problems. Do

not use the saw, if the safety cover

does

not move freely and does not close in-

stantly. Never fix or tie back the safety

cover in the opened position. If the saw

is dropped accidentally, the safety cover can be

bent. Ensure that the safety cover moves freely

and does not touch either the saw blade or

other parts.

b) Check condition and function of the

safety cover spring. If safety cover

and spring do not work faultlessly,

get the saw serviced before using it.

Damaged parts, sticky deposits or masses of

wood shavings lead to delayed operation of

the bottom safety cover.

c) If you plunge cut at angles other than

right angles, secure the guide plate of

the saw to prevent sliding sideways.

Lateral movement can lead to jamming of the

saw blade and therewith to kickback.

d) Do not put the saw done on the bench

or on the floor without covering the

saw blade with the safety cover. An

unprotected saw blade moves the saw against

the direction of the cut, and cuts everything

that is in the way. Please keep in mind that the

saw runs on.

Please ensure that only persons over 16 years

of age operate this appliance according to the

instructions in this operating instructions!

Note: Do not use grinding discs. Injuries and dam-

age to objects could result.

Safety recommendations for the

correct use of superabrasives

a) General

Superabrasives are breakable and shall therefore

be handled with utmost care! The use of damaged

or improperly mounted or used superabrasives is

dangerous and can cause serious injuries.

b) Delivery, handling and storage

Superabrasives shall be handled and transportes

with care. Superabrasives shall be stored in such a

manner that they are not subjected to mechanical

damages and harmful environmental inﬂuences.

Avoid the danger of death from

electric shock:

Regularly check the condition of the appliance,

mains cable and plug. Do not operate appli-

ances with damaged parts of that description.

Never open the appliance. Damaged appli-

ances, mains cables or plugs main danger to

life due to electric shock. Always have repairs

or parts exchanges carried out at the service

centre or by an electrician.

Do not operate the appliance when it is wet or

in damp environments.

If you work outside, connect the device to a

residual current (RCD) protective switch with

a maximum 30 mA tripping current. Only use

extension leads approved for outdoor use.

General safety advice for electrical power tools / Start-up

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 55728 PTS 480 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 55728 PTS 480 A1 Manual

Product: