Manual Parkside IAN 55728 PTS 480 A1 (page 28 of 34) (English, German, Dutch)

745199

Zoom out

Zoom in

1/34

General safety advice for electrical power tools

with caution when using an electrical

tool. Do not use the electrical power

tool if you are tired or under the influ-

ence of drugs, alcohol or medication.

One moment of carelessness when using the

electrical power tool can lead to serious injury.

b) Wear personal protective equipment

and always wear safety glasses. The

wearing of personal protective equipment such

as dust masks, non-slip safety shoes, safety hel-

mets or ear protectors, appropriate to the type

of electrical power tool used and work under-

taken, reduces the risk of injury.

c) Avoid unintentional operation of the

device. Check that the electrical power

tool is switched off before you connect

it to the mains, pick it up or carry it.

Accidents can happen if you carry the electri-

cal tool with your finger on the ON / OFF switch

or with the device switched on.

d) Remove any setting tools or spanners

before you switch on the electrical tool.

A tool or spanner left attached to a rotating

part of an electrical tool can lead to injury.

e) Avoid placing your body in an unnat-

ural position. Keep proper footing and

balance at all times. By doing this, you will

be in a better position to control the electrical

power tool in unforeseen circumstances.

f) Wear suitable clothing. Do not wear

loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov-

ing parts. Loose clothing, jewellery or long

hair can become trapped in moving parts.

g) If vacuum dust extraction and collec-

tion devices are fitted, do not forget to

check that they are properly connected

and used correctly. The use of dust extrac-

tion reduces the hazard presented by dust.

4. Careful handling and use of

the electrical power tool

a) Do not overload the device. Always use

an electrical power tool that is intended

for the task you are undertaking. By

using the right electrical power tool for the job,

you will work safer and achieve a better result.

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and off

is dangerous and must be repaired.

c) Pull the mains plug from the socket

before you make any adjustments to

the appliance, change accessories or

when the device is laid aside. This pre-

caution prevents the unintentional start of the

electrical tool.

d) Always ensure that electrical power

tools are kept out of reach of children

when not in use. Do not let anyone

use the device if they are not familiar

with it or have not read the instructions

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

persons.

e) Maintain the electrical power tool care-

fully. Check that moving parts are work-

ing properly and move freely. Check for

any parts that are broken or damaged

enough to detrimentally affect the func

tioning of the electrical power tool.

Have

damaged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions. When doing

this, take the working conditions into

consideration, as well as the task at

hand. The use of electrical power tools for

purposes other than those intended can lead

to dangerous situations.

5. Service

a) Only have electrical power tools

repaired by qualified specialist per-

sonnel using OEM spare parts. This

General safety advice for electrical power tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 55728 PTS 480 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 55728 PTS 480 A1 Manual

Product: