749344
17
Zoom out
Zoom in
Previous page
1/74
Next page
17
GB IE
Use as a oor-mounted
appliance
B
You can use the device as a oor-
mounted appliance. For this pur-
pose, place the device on the two
bases (9).
Ensure stability and safety and a
heat-resistant surface.
The position as a oor-mounted appli-
ance is also ideally suited to allowing
the device to cool down after use.
Use of adapter nozzles
Before exchanging adapter noz-
zles, the adapter nozzle (5/6/7/8)
and blow-off pipe (4) must be suf-
ciently cooled down to avoid burns.
Various uses are possible. Always
comply with the safety instructions
and always handle the device with
care and caution.
Restrictor
Place the restrictor (5) on the blow-off pipe
(4).
Use the restrictor (5) to obtain selective
heat.
When using the restrictor (5), pay
particular attention to the heat
development at the cutting point. If
in doubt, do not stay in the same
place for too long in order to avoid
overheating the workpiece.
Surface nozzle
Place the surface nozzle (6) on the blow-off
pipe (4).
Use the surface nozzle (6) to obtain heat
over a large surface.
When using the surface nozzle (6),
pay particular attention to the heat
development in adjacent locations
of the cutting point. So that in cases
of doubt, no adjacent component is
overheated.
Spatula nozzle
Place the spatula nozzle (7) on the blow-off
pipe (4).
The spatula form of the nozzle serves the
purpose of the targeted hot air supply to
paint and lacquer surfaces. The paints and
lacquers can be removed with a spatula
and scraper. The spatula (7) itself is not
suitable for removing paint.
Grill lighter nozzle
Place the grill lighter nozzle (8) on the
blow-off pipe (4).
Change the device with the step switch (2)
to level "II". Place the grill lighter nozzle
(8) below the charcoal. Make sure that the
openings of the grill lighter nozzle (8) are
not covered by charcoal as this creates
heat accumulation in the unit, which is a
potential re hazard In just a few minutes
the charcoal is ignited.
Never use other methods for ignit-
ing charcoal at the same time while
using the grill lighter nozzle (8).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 313642 PHLG 2000 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 313642 PHLG 2000 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info