749344

Parkside IAN 313642 PHLG 2000 D3 Manual

16
Zoom out
Zoom in
Previous page
1/74
Next page
16
GB IE
• Do not connect a damaged
mains cable to the power sup-
ply. Do not touch a damaged
mains cable as long as it is
connected to the power supply.
A damaged mains cable can
result in voltage-carrying parts
being touched.
Initial start-up
When used for the rst time, some smoke
may escape. The smoke is caused by bind-
ers which are removed from the insulating
lm of the heater by the heat during rst
use. To ensure that the smoke escapes
quickly, the device should be placed on
the stand area. Be sure to ventilate the
working environment during rst use.
If the smoke/odour is too strong, move the
initial start-up to outside!
Operation
Switching ON and OFF
Change the step switch (2) to level "I". The
device reaches an air quantity of 300 l/min
at 350 ° C.
Change the step switch (2) to level "II". The
device reaches an air quantity of 500 l/min
at 550 ° C.
Change the step switch to level “0” to
switch it off.
Use as a solid fuel lighter /
use of the grill lighter nozzle
(8)
• Check that the solid fuel lighter
is in the correct position.
• Isolate from the mains before
removing it from the re.
• Allow the solid fuel lighter to
cool down before packing it
away.
• The connection cable or other
ammable materials must not
come into contact with the hot
parts of the solid fuel lighter.
Caution: This is how to avoid
accidents and injuries by an
electric shock:
Electrical safety
• Make sure that the mains volt-
age matches the details on the
type plate.
• Connect the device only to a
socket with a residual current
circuit breaker (RCD) with a trip-
ping current of not more than
30 mA.
• Do not use the mains cable to
pull the plug from the socket.
Protect the mains cable from
heat, oil and sharp edges.
• Switch the device off and pull
the mains plug out of the socket
if the mains cable is damaged.
If the connection cable of this
device is damaged, it must be
replaced by the manufacturer
or their customer service or by
a similarly qualied person in
order to avoid hazards.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 313642 PHLG 2000 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 313642 PHLG 2000 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info