749300

Parkside IAN 311912 PBH 1050 B2 Manual

20
Zoom out
Zoom in
Previous page
1/74
Next page
PBH 1050 B2 GB│IE │ 17 ■
Removing the quick-release chuck for round
shaft drill bits:
♦ To remove the quick-release chuck , pull the
locking collar backwards and remove the
quick-release chuck .
Use
Select operating mode
Function selector:
♦ Press and hold the release button on the
function selector switch . Turn the function
selector switch so that the required symbol
engages at the arrow mark:
Function Symbol
Drilling
Hammer drilling
Chiselling
Chisel position adjust-
ment
Adjusting chisel position:
You can rotate the tool to the required position for
chiselling using this function.
♦ Turn the function selector switch to position .
♦ Turn the tool in the tool holder to the required
position.
♦ Turn the function selector switch to position
for the chiselling function.
Select direction of rotation
♦ Select the direction of rotation by adjusting the
right/left rotation switch .
WARNING!
► The right/left running switch may only
be used / adjusted if the appliance is at a
standstill.
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch .
Switching the appliance off:
♦ Release the ON/OFF switch .
Switching to continuous operation:
♦ Press the ON/OFF switch . Lock it in the
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch and release it
again.
Preselecting rotational speed
You can use the speed preselector wheel to
preselect the rotational speed.
Level A (low rotational speed) up to level F (high
rotational speed). The speed you select depends
on the material to be processed. Work out the right
setting with this practical test:
- Levels D–F: high rotational speed:
for hammer drilling/chiselling in concrete or
stone.
- Levels A–C: medium rotational speed:
for drilling in steel or wood.
NOTE
► The set speed is only reached in continuous
operation.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 311912 PBH 1050 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311912 PBH 1050 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info