Manual Parkside IAN 311903 PWS 230 C3 (page 26 of 109) (English, German, Dutch, French, Polish)

749297

Zoom out

Zoom in

1/109

PWS 230 C3

■ 22 │ GB│IE

j) Hold the power tool only by the insulated

handles when you are carrying out work

in which the accessory tool may come into

contact with concealed power cables or the

tool’s own power cord. Contact with a live

cable can also make metal parts of the appli-

ance live and could result in an electric shock.

k) Keep the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get caught or cut and your

hand or arm could get caught in the rotating

accessory tool.

l) Never put the power tool down until the ac-

cessory tool being used has come to a com-

plete standstill. The rotating accessory tool can

come into contact with the surface and cause

you to lose control of the power tool.

m) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to physical injury.

n) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

o) Never use the power tool in the vicinity of

inﬂammable materials. Sparks can ignite these

materials.

p) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to electric shock.

Kickback and corresponding safety

instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, grinding

plate, wire brush, etc., catches or jams. Catching or

jamming leads to an abrupt stop of the rotating ac-

cessory tool. If this happens, an uncontrolled pow-

er tool turns rapidly against the direction of rotation

of the accessory tool caught in the blockage.

If, for example, a grinding disc catches or jams in a

workpiece, the edge of the grinding disc projecting

into the workpiece can get caught and break oﬀ

the grinding disc or cause a kickback. The grinding

disc can then ﬂy in the direction of the operator or

away from him, depending on the direction of rota-

tion of the disc at the blockage. This can also break

grinding discs.

A kickback is caused by incorrect use or misuse

of the power tool. This can be avoided by taking

proper precautions as described below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so they can

absorb the force of a kickback. Always use

the additional handle, if available, so that

you have the maximum possible control over

the kickback force or reaction forces at full

speed. By taking adequate precautions, the

operator can stay in control of the kickback and

reaction torques.

b) Never hold your hand close to a rotating ac-

cessory tool. The accessory tool could hit your

hand in the event of a kickback.

c) Avoid having any part of your body in the

region in which the power tool is likely to

move in event of a kickback. The kickback will

force the power tool in the opposite direction to

the direction of rotation of the grinding disc at

the blockage.

d) Take special care when working near cor-

ners, sharp edges, etc. Avoid allowing the

accessory tool to bounce back from the work-

piece or jam. The rotating accessory tool is

more likely to jam in corners or sharp edges or

if it rebounds oﬀ them. This can cause a loss of

control or kickback.

e) Do not use chains or toothed saw blades.

Such accessories often cause a kickback or loss

of control over the power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311903 PWS 230 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 311903 PWS 230 C3 Manual

Product: