749335

Parkside IAN 311314 PGI 1200 A1 Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
7GB/IE/NI
• Empty the engine oil from the engine (as described).
• Remove the spark plug connector (15) from the spark plug (16).
• Secure the device with a tension belt to prevent it slipping out of place.
• The generator can be lifted and carried by using the handle (1).
13. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or
recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Defective components must be
disposed of as special waste. Ask your dealer or your local council.
The packaging is wholly composed of environment ally-friendly materials that can be disposed of at a local recycling
centre.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out electrical devices.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a designated
collection point. This can occur, for example, by handing it in at an authorised collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of waste equipment may have negative consequences for the environment and human
health due to potentially hazardous substances that are often contained in electrical and electronic equipment. By properly disposing of
this product, you are also contributing to the effective use of natural resources. You can obtain information on collection points for waste
equipment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical and
electronic equipment or your waste disposal company.
Environmental protection
Take any contaminated maintenance material and operating materials to a collection point designated for this purpose.
When disposing of residual fluids (oils and fuel), observe the corresponding environmental regulations. We recommend taking all remain-
ing operating materials to your local collection point in a suitable sealed container. Do not pour the remaining operating materials into
waste or on the ground.
14. Troubleshooting
Fault Possible cause Remedy
Engine does not start Automatic oil cut-out has not responded Check oil level, top up engine oil
Spark plug fouled Clean or replace spark plug
No fuel Refuel / have the petrol cock checked
Generator has too little or no
voltage
Electronic defective Contact your dealer
Over-current circuit-breaker has triggered Actuate the circuit-breaker and reduce the
consumers
Air filter dirty Clean or replace the filter
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 311314 PGI 1200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311314 PGI 1200 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info