Manual Parkside IAN 311314 PGI 1200 A1 (page 9 of 48) (English, German, Dutch, French)

749335

Zoom out

Zoom in

1/48

4GB/IE/NI

5. Safety information

1. No modiﬁcations are allowed to be made to the genera-

tor

2. The speed preset by the manufacturer may not be

changed. The generator or connected devices could be

damaged.

3. Risk of poisoning! Fumes, fuels and lubricants are

toxic. Do not breath in the fumes.

4. Fire risk! Petrol and petrol fumes are highly ﬂammable

and explosive.

5. Motor exhaust gases are toxic. The generator must not

be operated in unventilated rooms. If the generator is to

be operated in well-ventilated rooms, the exhaust gases

must be discharged directly outside via an exhaust gas

hose. Additional requirements for protection against ﬁre

and explosion must also be observed. Even when using

an exhaust hose, toxic gas can still escape. Due to the

risk of ﬁre, the exhaust hose should never be aimed at

combustible material.

6. Never use the generator in rooms with highly ﬂammable

materials.

7. Hot surface! Risk of burning, do not touch the exhaust

system and engine unit.

8. Do not touch any of the mechanically moving or hot parts.

Do not remove any of the protective caps.

9. Protective equipment! Use suitable ear protection

when near the device.

10. Only original parts should be used for maintenance and

accessories.

11. Repair and maintenance work must only be performed by

authorised qualiﬁed personnel.

12. Protect yourself from electric shocks.

13. Never touch the generator with wet hands

14. Only use outside with a extension cable which is suitable

for that and is appropriately marked (H07RN).

15. If extension cables or mobile distribution networks are

used, the resistance value must not exceed 1.5 Ω. When

using extension cables, the total length of cables for a

cross section of 1.5 mm2 should not exceed 60 m; for a

cross section of 2.5 mm2, 100 m should not be exceeded.

16. Do not use the generator in the rain or snow.

17. Always turn oﬀ the engine when transporting or refuelling.

18. Fuel is combustible and highly ﬂammable. Do fuel the unit

during operation. Do not fuel the unit when someone is

smoking or near open ﬂames. Do not spill any fuel.

19. Do not refuel or empty near naked lights or ﬂames or ﬂy-

ing sparks. Do not smoke!

20. Put the generator on a secure and level place. Turning,

tipping or changing its position during operation is forbid-

den.

21. Install the generator at least 1 m away from the walls or

attached devices.

22. Children must be protected by ensuring that they stay a

safe distance away from the generator.

23. Some parts of the reciprocating internal combustion mo-

tor are hot and may cause burns. The warnings on the

generator must be observed.

24. Emission levels are represented in the technical data un-

der the stated values for sound power level (LWA) and

sound pressure level (LpA) and are not compulsory deﬁnite

working levels. Because there is a connection between

emission levels and immission levels, this can not reliably

used to determine the potentially necessary additional

precautions. Inﬂuencing factors on the workforce‘s cur-

rent immission level includes the properties of the work

area, other noise sources, air borne sound, etc. such as

e.g. the number of machines and other neighbouring pro-

cesses and intervals, to which the user is exposed. Also

the admissible immission levels can vary from country to

country. However, this information gives the user of the

machine the opportunity to have a better estimation of the

risks and dangers. Occasionally acoustic measurements

should be take after installation in order to determine the

sound pressure level.

25. Warning! Follow the electrical safety regulations that ap-

ply to the location where the generators are used.

26. Warning! Take into account the requirements and pre-

cautionary measures in the event of generators being re-

supplied, depending on the protective measures of this

device and the applicable directives.

27. Generator sets should only be used up to their rated out-

put under the rated ambient conditions. If the application

of the generating set is carried out under conditions which

do not comply with the reference conditions of ISO 8528-

10 (7.1), and if the cooling of the motor or generator is

impaired, e.g. as a result of operating in restricted areas,

a reduction in performance is required.

ATTENTION: Only use unleaded normal petrol as

fuel.

6. Technical data

Generator Inverter

Protection type IP23M

Continuous Power Pnenn (S1) 1000 W

Power Pmax (S2/5min) 1100 W

Power Pmax (S2/5s) 1200 W

Nominal voltage Unenn 230 V∼

Rated current Inenn 4,35 A

Frequency Fnenn 50 Hz

Type drive motor 4 stroke air-cooled

Engine displacement 54 cm³

Max. power (motor) 2.1 kW/2.85 PS

Fuel

Unleaded fuel

This device may not be

operated with E10 petrol

Tank capacity 4.2 l

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311314 PGI 1200 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 311314 PGI 1200 A1 Manual

Product: