749296
36
Zoom out
Zoom in
Previous page
1/130
Next page
PFBS 160 B2 GBIE 33
Router cage
With this attachment, the appliance is particularly
suitable for cutting special forms (holes for plugs,
etc.).
Insert the milling bit as described in the sec-
tion "Changing/inserting the tool/collet chuck".
Ensure that the shaft of the bit protrudes out of
the collet chuck by about 16 mm.
Screw the union nut anticlockwise off the
appliance and store it carefully.
Unscrew the router cage off the appliance.
To set the correct working height, undo the
locking screw and adjust the foot of the
router cage to the desired size.
Afterwards, retighten the locking screw .
ca. 16 mm
Changing the batteries
Make sure that the LED light is turned off.
Remove the three screws from the rear of the
grip ring with LED .
Replace the used batteries in the appliance
with new batteries of the same type (button
cell LR41). Note polarity when installing new
batteries.
Close the battery compartment again by
replacing the three screws.
Cleaning, care and storage
WARNING – RISK OF INJURY!
Switch the appliance off and remove the
power plug before starting any work on
the appliance.
The appliance is maintenance-free.
Remove all dirt from the appliance. Use a dry
cloth to do this.
WARNING!
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
Store the appliance and all the individual
pieces in the provided plastic case to ensure
you do not lose any part.
NOTE
Replacement parts not listed (such as the
rechargeable battery, battery charger) can
be ordered via our service hotline.
WARNING!
Always ensure that the power plug or the
mains cable is replaced only by the manu-
facturer of the appliance or its customer
service. This will ensure that the safety of the
appliance is maintained.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310860 PFBS 160 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310860 PFBS 160 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info