749295
20
Zoom out
Zoom in
Previous page
1/86
Next page
GB IE
20
c) Avoid contact with the tool insert
or the component part immedi-
ately after processing. The parts

d) Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part.
The loss of control can result in injuries.
 
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
f) If the tool’s mains power cable
is damaged, it must be replaced
with a particular power lead,
which may be obtained from the
manufacturer or their customer
service representative.
Residual risks

electric tool, some residual risks will remain.
Due to its construction and build, this elec-

 
surfaces.
b) Ear damage if working without ear
protection.
 

operating the appliance for longer pe-
riods of time or if the unit is not held or

Warning! During operation, this
electric tool generates an electro-



medical implants. To reduce the risk
of serious or lethal injuries, we
recommend that persons with medi-
cal implants consult their doctor
and the manufacturer of their medi-
cal implant before operating the
machine.
Operation
Inserting/replacing the tool
 
the tool holder (1).
2. To remove it, pull the bit off from
the tool holder (1).
Set the direction of rotation
You can toggle between right and left rota-

switch (5).

performed in standstill mode!
1. Clockwise direction: 
directional switch (5) to the right
up to the stop.
2. Counter-clockwise direction: 
the directional switch (5) to the
left up to the stop.


Switching on/off

voltage matches the voltage rat-

plate.
Connect the machine to the power

20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 309645 PDSSE 450 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 309645 PDSSE 450 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info