Manual Parkside IAN 309645 PDSSE 450 C3 (page 19 of 86) (English, German, Dutch, French, Polish)

749295

Zoom out

Zoom in

1/86

IEGB

4) USE AND TREATMENT

OF POWER TOOLS

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off.

controlled with the switch is dangerous

and must be repaired.

c) Remove the plug from the wall

socket and/or remove the

rechargeable battery before

you adjust the tool’s settings,

change accessories or put away

the tool. -



tool.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. 

tools are dangerous in the hands of

untrained users.

e) Look after power tools and

accessories carefully. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation.



-

tained power tools.

f) Keep cutting tools sharp and

clean. 

tools with sharp cutting edges are less



g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended



h) Hold the device by the insulated

gripping surfaces when per-

forming work in which the cut-

ting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

h) Keep handles dry, clean and

free from oil and grease.

handles and handle surfaces do not

permit safe operation and control over



5) SERVICE

Have your power tool serviced

-

ing only identical replacement

parts.

of the power tool is maintained.

Further safety directions

a) Hold the power tool by the

insulated handle grips when

performing work in which the

screw may come into contact

with hidden wiring or its own

power cord.

come into contact with a live electrical

cable, metal parts of the appliance

could also become live and cause an

electric shock.

b) Keep hands away from rotating

parts. Wait until the power tool

has stopped before placing it

down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 309645 PDSSE 450 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 309645 PDSSE 450 C3 Manual

Product: