748086
23
Zoom out
Zoom in
Previous page
1/102
Next page
23
GB IE
If the water level is too low, the silt in
the shaft can quickly dry out and im-
pede the pump when warming up.
Mains Connection
The pump you have purchases is already

is designed for connection to an earthed

Device) at 230 V ~ 50Hz.
Connecting the Pressure
Line
The pump is installed
 
 
1. Screw the quick-connect adapter
(8) onto the pump outlet (6).
2. Press the red release button on
the quick-connect adapter (8)
and slide the angle adapter with
quick-connect connector (9) into
the quick-connect adapter (9).
Let go of the red release button
again.
3. Fit the hose over the reducer (10)
and secure it with a hose clamp.
Or use a screw connection on
the angle adapter with quick-
connect connector (9), or on the
reducer (10).
Outlet with a 1½”-internal thread
on the pump for connection of the
quick-connect adapter (8) or for
direct connection of a hose with a

Outlet with 1½“-external thread at the
bracket adapter (9) for connection
of the reducer (10) or a 1½“-screw

Outlet on reducer (10) for connection
of a 1¼- or 1½”-hose as a


Outlet with 1“-external thread at
the reducer (10) for connection of a

Outlet with 1½“-thread at the reducer
(10) for connection of a 1“-hose as

clamp).
Note that the particle size may
be max. 19 mm if the reducer

the reducer and hose can become
blocked.

switch
 3) is adjusted so that
it can be started up immediately.
In the case of stationary
installation, check regularly (no less
then once every three months) that
( 3) is working.

( 

switch height adjustment (2) and
move it to the desired position.
 3).
- It must be positioned so that it
can lift and lower freely. The
switching point heights “On
and “Off” must be easy to
reach.


23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 307392 PTPS 1100 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307392 PTPS 1100 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info