Manual Parkside IAN 304520 PTBM 500 E5 (page 25 of 144) (English, German, Dutch, Danish, French, Polish)

748958

Zoom out

Zoom in

1/144

GB IE

32 Interlock switch

33 Lever for V-belt tension

34 On/Off switch, laser

35 Controller, laser

36 Battery compartment, laser

37 Middle drive pulley

38 Intake, middle drive pulley

39 Bearing points, intake

40 Bearing points, intake

41 Mounting screw, laser

Technical Data

Bench Pillar Drill ........PTBM 500 E5

Rated input voltage ..........230 V~, 50 Hz

Power input ............ 500 W (S2 15 min)*

Idling speed (n0)

Spindle ...................... 500 - 2500 min-1

Motor ................................ 1400 min-1

Safety class .......................................... I

Protection category...........................IPX0

Weight ........................................ 17 kg

Drill chuck ...........B16 (1.5 mm to 16 mm)

Spindle stroke .............................. 50 mm

Workpiece size ....................max. 60 mm

Laser class ...........................................2

Laser wavelength ........................650 nm

Laser power ..............................< 1 mW

Power supply

Laser module ........ 2 x 1,5 V Micro (AAA)

Sound pressure level

(LpA) ...................... 71 dB(A); KpA= 3 dB

Sound power level (LWA)

measured ............. 84 dB(A); KWA= 3 dB

Vibration(ah) ..... < 2,5 m/s2; K= 1,5 m/s2

* After continuous operation of 15 minutes the

drill stops until the device temperature devi-

ates by less than 2 K (2°C) from the room

temperature.

Levels of noise and vibration were determi-

ned according to the norms and regulati-

ons in the declaration of conformity.

The vibration emission value has been

measured according to a standardised

testing method and may be used for com-

parison with another electric tool.

The indicated vibration emission value may

also be used for an introductory assess-

ment of the exposure.

Warning:

The vibration emission value whilst

actually using the electrical tool

may vary from the given values in-

dependently of the type and way in

which the electric tool is used.

Try to keep the exposure to vib-

rations as low as possible. An

example of a measure to reduce

vibration exposure is limiting the

working hours. For this purpose all

parts of the operating cycle have to

be considered (for example, times

when the electric tool is switched

off and times when it is switched on

but running without any load).

Notes on safety

Caution! When using power tools,

observe the following basic safety

measures for the prevention of

electric shocks and the risk of injury



Please read all these instructions

before using this electric tool and

please keep the safety instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304520 PTBM 500 E5 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 304520 PTBM 500 E5 Manual

Product: