748958
24
Zoom out
Zoom in
Previous page
1/144
Next page
24
GB IE
Intended purpose
The bench drill is designed for drilling in
metal, wood, plastic and tiles. Straight
shank drills with a drilling diameter from
1.5 mm to 16 mm can be used.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is not to be used by persons.
under the age of 16. Children over the
age of 16 may use the tool except under
supervision.
The manufacturer is not liable for damage
caused by an improper use or incorrect
operation of this device.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the pa-
ckaging material correctly.
- Baseplate
- Drilling bench
- Column tube
- Motor unit
- 3 drill lifting arms
- Safety device
- Drill chuck
- Drill chuck key
- Allen key
- Vice
- 2 x 1.5 V batteries, AAA size
- Mounting material
- Instruction Manual
Description of functions
Please refer to the descriptions below for
information about the operating devices.
Overview
A
1 Off switch
2 On switch
3 Gear cover
4 Drill chuck
5 Emergency stop switch
6 Safety device
7 Drill spindle
8 Locking screw of the depth stop
9 Hand spindle guide with
3 drill lifting arms
10 Holder for drill chuck key
11 Locking screw for gear cover
12 Retaining screws for motor unit
13 Motor unit
14 Column tube
15 Locking handle
16 3 Assembly screws
17 Baseplate
18 Angle scaling
19 Retaining screw for drilling
bench inclination
20 Drilling bench
21 Depth stop with scale
22 Vice mounting material
23 Vice
24 Chuck jaws
25 Allen key
26 Drill chuck key
27 Clamping screws for motor unit
D
28 Clamping screw
for safety device
E
29 V-belt
30 Spindle-side drive pulley
31 Motor side drive pulley
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 304520 PTBM 500 E5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304520 PTBM 500 E5 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info