Manual Parkside IAN 304379 POF 1200 C2 (page 32 of 140) (English, German, Dutch, French, Portuguese, Spanish)

748074

Zoom out

Zoom in

1/140

GB IE

7. Move the machine with protruding tem-

plate guide (25) along the template.

Apply slight pressure during this work.

The template must be at least as

high as the ball race (26) of the

template guide (25).

Milling with centring tip

By means of the centring tip, you can do

circular milling work.

1. Turn the parallel stop (24) around so

that the stop edge points up.

2. Screw on the centring tip (23) on the

parallel stop by means of the buttery

nut. In the process, counter lock the

centring tip in the long hole of the com-

bination wrench (

27).

3. Screw the guide bars (29) of the paral-

lel stop (24) on the baseplate (10) and

tighten the retaining screws (9).

4. Push the centring tip (23) in the marked

centre of the circle to be cut.

5. Move the machine circularly once in

the circle around the centring tip (23).

Cleaning/maintenance

Ask our service centre to carry out

any work that is not described in

these instructions. Use only original

parts. In this way you avoid dam-

age to the appliance and possible

injury to people.

Pull out the power plug before car-

rying out any work on the equip-

ment. There is a risk of electrocution

or of injury from moving parts.

Milling with parallel stop

You can mill notches and proles with the

parallel stop by moving the parallel stop

along the workpiece edge at a pre-set

distance.

1. Insert the parallel stop (24) with

the guide bars (29) into the guide

rails (15) of the baseplate (10).

Tighten the retaining screws (9).

2. Move the turned on machine

along the workpiece edge with

lateral pressure on the parallel

stop (24).

Milling with template

guide

By means of the template guide (25), you

can transfer contours from templates to

workpieces.

Inserting the template guide:

1. Screw off the suction adapter as applies.

2. Insert the template guide (25) into the

sliding plate (11). The ball race (26)

must point down.

3. Fasten the template guide (25) to the

recessed head screws (21) that are in-

cluded in the delivery.

Inserting the cutter:

4. Insert a cutter that has a diameter

smaller than the inner diameter of the

template guide (25).

5. Set the desired cutting depth (see “Ini-

tial operation”).

Milling with template guide

6. Loosen the clamping lever

(

19) and lower the machine down-

ward until the previously set cutting

depth is reached.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304379 POF 1200 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 304379 POF 1200 C2 Manual

Product: