Manual Parkside IAN 300488 PDFP 500 C3 (page 19 of 73) (English, German, Dutch, French, Portuguese, Spanish)

748054

Zoom out

Zoom in

1/73

PDFP 500 C3

■ 16 │ GB│IE

Adjusting the airﬂow

NOTE

► We recommend starting with the airﬂow set

to maximum. To do this, open the airﬂow

regulator to maximum as described below

in the section "Increasing the airﬂow".

Increasing the airﬂow:

NOTE

► Increasing the airﬂow is generally advisable

if the dispersion is too coarse.

♦ Turn the airﬂow control anticlockwise.

Decreasing the airﬂow:

NOTE

► Decreasing the airﬂow is generally advisable

if the paint mist is too strong.

♦ Turn the airﬂow control clockwise.

Maintenance and cleaning

WARNING! RISK OF INJURY!

Disconnect the appliance from the

compressed air supply.

NOTE

► Thorough cleaning after every use is very

important for safety and operation. Other-

wise, the needle could get blocked and

proper operation of the appliance cannot

be guaranteed.

■ Wear suitable gloves when cleaning.

■ Do not use any hydrocarbon-based solvents

like benzene, ethyl chloride, etc., as these could

trigger chemical reactions with some of the

materials in the paint spray gun. This can lead

to dangerous reactions.

CAUTION!

► Never immerse the paint spray gun com-

pletely in solvent.

■ After every use, squirt thinners (only outside

– risk of explosion!) or water through the

appliance.

♦ To clean the housing, the nozzle head and the

spray holes inside it, use the supplied cleaning

brush or a cloth. Never use petrol, solvents or

cleansers which can damage plastic.

♦ First, unscrew the stroke limiter screw by turning

it in an anticlockwise direction.

♦ Remove the spring .

♦ Remove the needle using pliers (see ﬁg. A).

♦ Clean the needle carefully with the brush

(see ﬁg. B).

♦ Replace the needle in the paint spray gun.

♦ Push the spring onto the end of the needle .

♦ Screw the stroke limiter screw tight by turning

it clockwise .

♦ Screw the ﬂow cup anticlockwise oﬀ the

spray gun.

♦ Remove the ﬁlter as shown in ﬁg. C and

clean it with the cleaning brush.

♦ Also clean the screw thread of the ﬂow cup

using the cleaning brush (see ﬁg. D).

♦ Replay the ﬁlter in the spray gun (see ﬁg. C)

and screw the ﬂow cup clockwise ﬁrmly

onto it.

♦ For rust protection purposes, you can spray a

little sewing machine oil through the spray gun

after cleaning.

♦ Oil all moving parts from time to time.

♦ After cleaning the needle, the thread and seal

must be lightly greased with a suitable lubricant.

♦ Do not use any silicon-based lubricants.

♦ Store compressed-air appliances only in dry

rooms.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300488 PDFP 500 C3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 300488 PDFP 500 C3 Manual

Product: