748054
18
Zoom out
Zoom in
Previous page
1/73
Next page
PDFP 500 C3 GBIE 15
Connect the compressed air hose with the
quick-action coupling to the compressed-air
connection on the appliance. The connection
locks automatically.
Set the working pressure on the filter pressure
reducer of the compressed air source to 3 bar.
Preparing the surface
Carefully cover a large area around the spray
surface. Any surface that is not masked could
become contaminated.
Ensure that the spray surface is clean, dry and
free of grease.
Polished surfaces should be lightly sanded and
the sanding dust removed.
Switching the appliance on/off
Working methods:
Fit the filter in the gun (see fig. C).
The vent must remain open while working.
When thinning, ensure that the spray material
and the thinners are suitable for each other.
Using an unsuitable thinner can lead to the
formation of lumps which, in turn, can block the
spray gun.
Screw the flow cup clockwise onto the spray
gun.
Fill the flow cup with spray material and
close the lid .
Hold the spray gun at a constant distance from
the object. The ideal spraying distance is ap-
prox. 15 cm.
Work out the right settings by carrying out a test.
Do not switch the appliance on/off over the
spray surface, rather start/end the spraying
process approx. 10 cm from the spray surface.
Switching on:
To switch on, pull the trigger and keep it
pressed in.
Switching off:
To stop working, simply release the trigger .
Setting the paint jet pattern
The appliance has two settings: round jet and
broad jet.
Round jet Broad jet
Setting the round jet:
Use the round jet for small surfaces, corners
and edges.
Turn the control clockwise .
Setting the broad jet:
You can use the broad jet vertically or horizon-
tally for larger surfaces.
Turn the control anticlockwise .
The nozzle head can be turned into any
position between the horizontal and the vertical.
Adjusting the paint flow
NOTE
The front locking bolt is designed to limit the
adjustment range of the stroke limiter screw .
Increasing the paint flow:
Turn the stroke limiter screw anticlockwise.
Decreasing the paint flow:
Turn the stroke limiter screw clockwise.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 300488 PDFP 500 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300488 PDFP 500 C3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info