748082
18
Zoom out
Zoom in
Previous page
1/82
Next page
Introduction / Safety
Technical data
Dimensions: 240 x 235 x 58 mm
(L x H x W)
Weight
(without fasteners): 1197 g
Trigger type: Compressed air
Maximum permissible
pressure: 8 bar
m
a
x
.
8
b
a
r
Recommended pressure
range: 4 to 7 bar
Air consumption per
drive in process: approx. 0.09 litre
Recommended lubricant: Compressed air
special oil
Loading capacity: 100 pcs
Nail lengths: 15 mm, 20 mm,
5,7 mm
10-40 mm
25 mm, 30 mm,
32 mm, 35 mm,
38 mm, 40 mm,
45 mm, 50 mm
Staple lengths: 10–40 mm
Staple width: 5,7 mm
Recommended
Internal hose diameter: 9 mm
Compressed air quality: Cleaned,
oil-misted and
condensate-free
Special references
Instructions
The following standard is applicable to fastener
driving tools as per EN 792-13:2000 „Hand-held
non-electric power tools – safety requirements –
Part 13: Fastener driving tools“.
The standard requires that
Only those fasteners which are specified in the
operating instructions (see technical data) shall
be used in fastener driving tools. The fastener
driving tool and the fasteners specified in the
operating instructions are to be considered as
one unit safety system.
Quick-action couplings shall be used for
connection to the compressed air system and
the non-sealable nipple must be fitted at the
tool in such way that no compressed air re-
mains in the tool after disconnection.
Oxygen or combustible gases shall not be
used as an energy source for compressed air
operated fastener driving tools.
Fastener driving tools shall only be connected
to an air-supply where the maximum allowab-
le pressure of the tool cannot be exceeded by
more than 10 %; in the case of higher pressu-
res, a pressure reducing valve which includes a
downstream safety valve shall be built into the
compressed air supply.
Only spare parts specified by the manufacturer
or his authorized representative shall be used
in the repair of fastener driving tools.
Repairs shall be carried out only by the ma-
nufacturers’ authorized agents or by other
experts, having due regard to the information
given in the operating instructions.
NOTE
Experts are those who, as a result of professional
training or experience, have sufficient expertise
in the field of fastener driving tools and sufficient
familiarity with relevant government industrial pro-
tection provisions, accident prevention regulations,
directives, and generally recognized technical re-
gulations (e.g. CEN and CENELEC-standards),
to be able to assess the safe condition of fastener
driving tools.
Stands for mounting the fastener driving tools
to a support, for example to a work table,
shall be designed and constructed by the stand
manufacturer in such a way that the fastener
driving tools can be safely fixed for the inten-
ded use, thus for example avoiding damage,
distortion, displacement.
Special fields of application for the fastener driving
tools may require the observance of additional
provisions and regulations (for example working
in areas subject to an explosion hazard).
5 DE/AT/CH
Inhaltsverzeichnis
Legende der verwendeten Piktogramme .........................................................Seite 6
Einleitung ........................................................................................................................................Seite 6
Bestimmungsgemäße Verwendung ...................................................................................................Seite 6
Ausstattung ..........................................................................................................................................Seite 6
Lieferumfang .......................................................................................................................................Seite 6
Technische Daten ................................................................................................................................Seite 7
Sicherheit ........................................................................................................................................Seite 7
Allgemeine Sicherheitshinweise ........................................................................................................Seite 7
Vor der Inbetriebnahme ....................................................................................................Seite 8
Gerät aufstellen ..................................................................................................................................Seite 8
Inbetriebnahme ........................................................................................................................Seite 8
Heizstufen und Ventilator ein- / ausschalten .....................................................................................Seite 8
Temperatur einstellen..........................................................................................................................Seite 9
Gerät ausschalten ..............................................................................................................................Seite 9
Überhitzungsschutz ............................................................................................................................Seite 9
Fehlerbehebung ........................................................................................................................Seite 10
Wartung, Reinigung und Lagerung .........................................................................Seite 10
Service ...............................................................................................................................................Seite 10
Garantie ...........................................................................................................................................Seite 11
Entsorgung.....................................................................................................................................Seite 11
Original-EG-Konformitäts erklärung / Hersteller .........................................Seite 12
277044_par_ROWI_Heizgeblaese_content_AT.indd 5 13.07.16 08:49
Introduction / Special references
Introduction / Special references
GB/IE/NI 19
Introduction / Special references
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 300290 PDT 40 E4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300290 PDT 40 E4 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 7,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info