Manual Parkside IAN 300221 PHD 110 B1 (page 24 of 108) (English, German, Dutch, French, Portuguese, Spanish)

748036

Zoom out

Zoom in

1/108

GB IE

• Lock / unlock the switch-on lever

of the gun (4) by depressing the

locking lever (19).

Lock the switch-on lever to prevent

the pressure washer from being in-

advertently/accidentally started.

Locked

Open

In case of leaks in the water

system, immediately switch

off the equipment at the on/

off switch (17) and discon-

nect the mains cable (8)

of the equipment from the

mains. There is a risk of elec-

tric shock. Start restoring the

water connections (see “Ini-

tial Operation – Setting up”).

If there is still air in the equipment,

please proceed as follows:

Bleed the supply hose:

1. Remove the quick connection for the

garden hose adapter on the water con-

nection (10) and open the water tap

until water with no bubbles emerges.

2. Close the water tap.

3. Connect the supply hose to the equip-

ment with the aid of the quick connec-

tion for the garden hose adapter (10).

4. Fully open the water tap.

Bleed the equipment:

5. Switch on the equipment at the on/off

switch (17) until the pressure has built

up.

6. Switch off the equipment at the on/off

switch (17).

7. Depress the start lever on the spray

gun (10) until the pressure is released.

8. Please repeat steps 5. to 7. several

times until there is no further air in the

equipment.

Interrupting operation

• Release the lever of the gun (

4).

• During prolonged work intervals turn

off the washer by its ON / OFF switch

(

17).

Ending operation

• After working with cleaning agents,

run the equipment with clean water to

completely rinse the cleaning agent

from the pipes.

• Release the lever of the gun (

4).

• Turn off the pressure by its ON / OFF

switch (

17).

• Turn off the water tap.

• Pull the lever of the gun (

4) to vent

the pressure existing within the system.

• Pull the mains plug and wind up the

mains cable.

• Disconnect the pressure washer from

the water mains.

Using detergents

The washer was designed for operation

with a neutral detergent based on a bio-

logically decomposable anionic tenside.

Other detergents or chemical substances

could impair the safety of the washer and

damage it.

Ao tentar usar o meu, tudo está bem liga-se e trabalha só que quando se usa a pistola não há pressão nenhuma Submitted on 9-6-2023 at 15:57
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300221 PHD 110 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 300221 PHD 110 B1 Manual

Product: