748036
23
Zoom out
Zoom in
Previous page
1/108
Next page
23
GB IE
the guidance and slide it into the
receptor on the holder for the
spray gun (5).
Screw the equipment side of the
high-pressure hose connection
(1) to the high-pressure hose con-
nection (7) on the equipment.
Insert the high-pressure connec-
tion on the gun side (18) into the
spray gun (14).
Establish the water supply by
connecting the rapid-action wa-
ter supply connector to the water
connection with sieve insert
(
A
10).
C
Connect to the spray gun (4) by
inserting and screwing in the jet
tube (2).
If the jet pipe (2) is mounted,

jet nozzle (11) or the high-pres-
sure nozzle (12) by inserting into
the jet pipe. (2) The attachments
snap into place. To remove the
attachments, press the side lock
on the front end of the jet pipe
(9) and pull the attachment for-
wards to disconnect it.
Screw in to connect the deter-
gent container with nozzle (
A
15) directly to the spray gun (4).
With using the cleaning agent
container with the nozzle (
A
15), pour only cleaning agent
into the container. It is sucked in
automatically.
The width of the jet can be increased by
turning the end of the nozzle to the left. To
reduce the width of the jet, turn the end of
the nozzle to the right.
Mains connection
The pressure washer you have acquired is
-
sure washer must only be connected to an
earthed socket 230 V ~ 50 Hz.
Only operate the pressure washer
after all the above points have been
observed.
Ensure that the pressure washer is
turned off by its ON/OFF switch (
A
17).
Insert the mains plug into the mains
socket
Operation
Connect the equipment to the water
tap. Observe the regulations for the
use of a system separator.
Turn on the water tap entirely.
Never operate the pressure washer
with a closed water tap. Dry run-
ning will damage the washer!
Be prepared for the recoil
force of the emitted water jet!
Ensure that you are standing
-
ing the gun (
A
4) securely,
otherwise you could injure
yourself or other people.
Switch on the pressure washer with the
ON/OFF switch (
A
17).
Pull the lever of the gun (
A
4) to turn
on the washer.
Releasing the lever will switch
off the washer, but the pressure
within the system is retained.
23


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-ian-300221-phd-110-b1

Reset search

  • Ao tentar usar o meu, tudo está bem liga-se e trabalha só que quando se usa a pistola não há pressão nenhuma Submitted on 9-6-2023 at 15:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 300221 PHD 110 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300221 PHD 110 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info