748020
15
Zoom out
Zoom in
Previous page
1/74
Next page
PFS 710 D3
12 
GB
IE
SABRE SAW PFS 710 D3
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is designed for sawing, cutting to
length and adapting wood, plastics and construc-
tion materials. The sabre saw is suitable for rough
sawing work, straight and curved cuts and cuts off
surfaces flush. Heed the information concerning
saw blades and practical advice on sawing. Any
other uses of or modifications to the machine are
deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts
no responsibility for damage(s) attributable to
misuse. This appliance is not intended for commer-
cial use.
Features
Stroke rate adjusting wheel
Locking switch
ON/OFF switch
Handle
Footplate
Saw blade
Quick-release chuck
Work light
Locking lever for footplate
Cover for carbon brushes
Release button
Saw blade for wood
Bimetal saw blade
Package contents
1 sabre saw PFS 710 D3
1 saw blade for wood HCS 152 mm
1 bimetal saw blade 152 mm
1 set of operating instructions
Technical data
Rated voltage: 230 V
~
, 50 Hz
(AC)
Rated power
consumption: 710 W
Rated idle speed: n
0
0–2800 rpm
Stroke length: 20 mm
Max. cutting
performance: Wood 160 mm
Aluminium 18 mm
Metal 8 mm
Sawblade mounting:
1
/
2
" (12.7 mm)
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
PA
= 88 dB(A)
Uncertainty: K = 3 dB
Sound power level: L
WA
= 99 dB(A)
Uncertainty: K = 3 dB
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Total vibration value:
Cutting boards: a
h,B
= 9.8 m/s
2
Uncertainty: K = 1.5m/s
2
Cutting wooden beams: a
h,WB
= 12.1 m/s
2
Uncertainty: K = 1.5m/s
2
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 295715 PFS 710 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 295715 PFS 710 D3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info