747887
27
Zoom out
Zoom in
Previous page
1/97
Next page
Q Troubleshooting
WARNING!
u Only perform the steps described within
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre or
a similarly qualified specialist if you cannot
solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
Problem Possible cause Solution
Product
does not
start
Not connected to
power supply
Connect to
power supply
Power cord or plug is
defective
Check by
a specialist
electrician
Other electrical defect
to the product
Check by
a specialist
electrician
Product
does not
reach full
power
Extension cord not
suitable for operation
with this product
Use a proper
extension cord
Power source
(e. g. generator) has
too low voltage
Connect to
another power
source
Air vents are blocked Clean the air
vents
Unsatisfac-
tory result
Accessory is worn Replace with
a new one
Accessory not suitable
for intended operation
Use suitable
accessory
Product
suddenly
stops
Product overloaded Remove the
product from
the workpiece
and switch it on
again
Excessive
vibration or
noise
Accessory is dull /
damaged
Replace with
a new one
Bolts / nuts are loose Tighten bolts /
nuts
Q Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which are
marked with abbreviations (a) and
numbers (b) with following meaning: 1–7:
plas- tics / 20–22: paper and fibreboard /
80–98: composite materials.
The product and packaging mate-rials are
recyclable, dispose of it separately for
better waste treat- ment.
The Triman logo is valid in France only.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
To help protect the environment,
please dispose of the product properly
when it has reached the end of its useful life
and not in the household waste. Information
on collection points and their opening hours
can be obtained from your local authority.
Q Service
WARNING!
u Have your product repaired at the service
centre or an electrician, using only original
manufacturer parts. This will maintain the
safety of this product.
u Always have a plug or power cord replaced
by the product manufacturer or its service
centre. This will maintain the safety of this
product.
29 GB / IE
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292293 PDBG 125 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292293 PDBG 125 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info