Manual Parkside IAN 291874 PHKSA 20 Li A2 (page 27 of 117) (English, German, Dutch, French, Portuguese, Spanish)

746778

Zoom out

Zoom in

1/117

PHKSA 20-Li A2

│

23 ■

c) If you want to restart a saw that is still in the

workpiece, centre the saw blade in the cut

and check to ensure that the teeth are not

caught anywhere in the workpiece. If the saw

blade catches it can jump out of the workpiece

or cause a kickback when the saw is restarted.

d) Support large panels to minimise the risk of

blade pinching and kickback. Large panels

tend to bend under their own weight. Panels/

boards must be supported on both side: i.e.

both in the vicinity of the saw cut and also at

the edge.

e) Do not use blunt or damaged saw blades.

Saw blades with blunt or misaligned teeth may

cause excessive friction as the saw cut is too

narrow, and this can cause a saw blade jam

and kickback.

f) Before sawing, ensure that the fastenings for

the cut depth and cut angle settings are tight-

ened. If the settings change while sawing, the

saw blade might jam and cause a kickback.

g) Be particularly careful when sawing in ex-

isting walls or other obscured areas. The

inserted saw blade could get caught on hidden

objects and cause a kickback.

Function of the lower blade guard

a) Check whether the lower blade guard closes

properly before each use. Do not operate

the saw if lower blade guard does not move

freely and close instantly. Never clamp or tie

the lower blade guard into the open position.

If the saw is accidentally dropped, lower blade

guard may be bent. Raise the blade guard with

the release lever and make sure it moves freely

and does not touch the blade or any other part

at all angles and cut depths.

b) Check the operation of the lower blade

guard spring. Have the saw serviced before

using it if the lower blade guard and spring

are not working properly. Damaged parts,

sticky deposits or accumulations of chippings

can cause the lower blade guard to operate

slowly.

c) The lower blade guard may be retracted

manually only for special cuts such as "plunge

cuts" and "compound cuts". Raise the lower

blade guard with the release lever and re-

lease it as soon as blade enters the material.

For all other sawing, the lower blade guard

should operate automatically.

d) Always ensure that the lower blade guard is

covering the blade before placing the saw

down on the workbench or ﬂoor. An unpro-

tected, coasting saw blade will move the saw

in the opposite direction to the cutting direction

and saw anything in its path. Always, take into

account that the saw blade takes some time to

stop spinning.

Safety guidelines for battery charg-

ers

■ This appliance may be used by chil-

dren aged 8 years and above and

by persons with limited physical,

sensory or mental capabilities or

lack of experience and knowledge,

provided that they are under super-

vision or have been told how to use

the appliance safely and are aware

of the potential risks. Do not allow

children to use the appliance as a

toy. Cleaning and user maintenance

tasks may not be carried out by chil-

dren unless they are supervised.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291874 PHKSA 20 Li A2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 291874 PHKSA 20 Li A2 Manual

Product: