Manual Parkside IAN 291874 PHKSA 20 Li A2 (page 26 of 117) (English, German, Dutch, French, Portuguese, Spanish)

746778

Zoom out

Zoom in

1/117

PHKSA 20-Li A2

■ 22 │ GB

│

Appliance-speciﬁc safety instructions

for circular saws

Safety instructions for all saws

Sawing method

a) DANGER! Keep your hands clear of

the sawing area and the saw blade.

Hold the auxiliary handle or motor

housing with your other hand. When both

hands are being used to hold the saw, neither

can be injured by the saw blade.

b) Do not reach underneath the workpiece. The

blade guard cannot protect you from the saw

blade below the workpiece.

c) Set the cutting depth to match the thickness

of the workpiece. Less than a full tooth height

should be visible below the workpiece.

d) Never hold the workpiece to be sawn in your

hand or over your leg. Fasten the workpiece

onto a stable working surface. It is important

to fasten the workpiece securely to minimise the

danger of bodily contact, jamming of the saw

blade or loss of control.

e) Hold the power tool only by the insulated

handles when you are carrying out work

during which the accessory tool may come

into contact with concealed power cables or

the tool’s own power cord. Contact with a live

wire will also make exposed metal parts of the

power tool live and could give the operator an

electric shock.

f) When making longitudinal cuts, always use

a rip fence or a straight edge guide. This will

improve the accuracy of your cut and reduce

the likelihood of the saw blade jamming.

g) Always use saw blades of the correct size

and with an appropriate central ﬁxing bore

(e.g. star-shaped or round). Blades that do not

match the mounting hardware of the saw will

run eccentrically, causing loss of control.

h) Never use damaged or incorrect blade wash-

ers or bolts. The blade washers and bolts were

specially designed for your saw, for optimum

performance and safety of operation.

Further safety instructions for all saws

Kickback - causes and corresponding safety

instructions

▯ A kickback is a sudden reaction caused as a

result of the saw blade catching, jamming or

being falsely aligned, causing the saw to jump

up uncontrollably and out of the workpiece in

the direction of the operator;

▯ if the saw blade catches or jams in a narrowing

saw cut, the blade can no longer rotate and the

power of the motor throws the appliance back

in the direction of the operator;

▯ if the saw blade twists in the saw cut or be-

comes misaligned, the teeth at the rear edge of

the saw blade can become caught in the wood

surface, causing the saw blade to jump out of

the cut and the saw to jump backwards in the

direction of the operator.

Kickback is a result of saw misuse and/or incorrect

operating procedures or conditions. This can be

avoided by taking proper precautions as described

below.

a) Hold the saw ﬁrmly in both hands and posi-

tion your arms such that they can absorb the

force of a kickback. Always stand to the side

of the saw blade and never in line with it. If

a kickback occurs, the circular saw may jump

backwards. However, by taking appropriate

precautions the operator can control the kick-

back forces.

b) If the saw blade jams or you stop working,

switch the saw oﬀ and hold it steadily in the

workpiece until the saw blade has completely

stopped turning. Never attempt to remove

the saw from the workpiece or pull it back-

wards while the saw blade is still moving as

this could lead to a kickback. Investigate and

take corrective actions to eliminate the cause of

blade binding.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291874 PHKSA 20 Li A2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 291874 PHKSA 20 Li A2 Manual

Product: