748038
22
Zoom out
Zoom in
Previous page
1/92
Next page
PTSS 1200 B1
GB
IE
 19
Original accessories/auxiliary
equipment
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Only the original guide rails may be used.
All blades used should conform to EN 847-1.
Operation
Fitting/changing the saw blade
Always remove the plug from the power socket
before working on the appliance.
NOTE
Position the base plate for this operation on
the edge of a stable surface so that the saw
blade
can be lowered.
1. Activate the safety lock-out and push the
motor unit forwards.
2. Open the clamping lever
. Release the safety
lock-out . The motor unit clicks into place. The
movement of the motor unit is blocked upward
and downward.
3. The clamping screw/washer
14a
is now in posi-
tion
14b
.
4. Press the spindle lock button
and use the
Hex key to open the clamping screw/
washer
14a
.
5. Remove saw blade
.
NOTE
Ensure that the factory-fitted flange X stays in
place during installation and removal (see fig. A).
Fig. A
6. Fitting a saw blade
is carried out in the
reverse order.
WARNING!
The direction of rotation of the saw blade
and the machine must match.
Connecting the sawdust extraction
device
If required, attach the adapter for dust extrac-
tion to the chip ejector .
Connect an approved dust and chip extraction
device.
Check that the blade guard is
functioning
NOTE
Position the base plate for this operation on
the edge of a stable surface so that the saw
blade
can be lowered.
Activate the safety lock-out
and lower the
circular saw.
Check whether the saw blade
rubs against
the blade guard and whether it moves back to
its starting position automatically.
Operation
Switching on and off
Switching on:
Push the safety lock-out
upwards and hold it
in position.
Press the ON/OFF switch . Once the saw is
running, you can release the safety lock-out .
Switching off:
Release the ON/OFF switch
.
Setting the cutting depth (dive depth)
Undo the screw for the cutting depth adjust-
ment and push the stop to the desired
cutting depth on the cutting depth scale :
without guide rail, see mark A.
with guide rail, see mark B.
Retighten the screw for the cutting depth adjust-
ment
.
X
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 290795 PTSS 1200 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 290795 PTSS 1200 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info