Manual Parkside IAN 290795 PTSS 1200 B1 (page 20 of 92) (English, German, Dutch, French, Portuguese, Spanish)

748038

Zoom out

Zoom in

1/92

PTSS 1200 B1

│

17 ■

Appliance-speciﬁc safety instructions

for circular saws

Cutting procedures

a) Danger! Keep your hands clear of the sawing

area and the saw blade. Hold the auxiliary

handle or motor housing with your other hand.

When both hands are being used to hold the

saw, neither can be injured by the saw blade.

b) Do not reach underneath the workpiece. The

blade guard cannot protect you from the saw

blade below the workpiece.

c) Adapt the cutting depth to the thickness of the

workpiece. Less than a full tooth height should

be visible below the workpiece.

d) Never hold the workpiece to be sawn in your

hand or over your leg. Fasten the workpiece

to a stable working surface. It is important to

fasten the workpiece securely to minimise the

danger of bodily contact, jamming of the saw

blade or loss of control.

e) Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting tool may contact hidden

wiring or its own cord. Contact with a live

wire will also make exposed metal parts of the

power tool live and could give the operator an

electric shock.

f) When making longitudinal cuts, always use

a guide rail or a straight edge guide. This will

improve the accuracy of your cut and reduce

the likelihood of the saw blade jamming.

g) Always use saw blades with the correct size

and shape (diamond versus round) of arbour

holes. Blades that do not match the mounting

hardware of the saw will run eccentrically,

causing loss of control.

h) Never use damaged or incorrect saw blade

washers or screws. The saw blade washers

and screws have been specially designed for

your saw to provide optimum performance and

operational safety.

Further safety instructions for all

saws

Kickback causes and corresponding safety

instructions

– A kickback is a sudden reaction caused as a

result of the saw blade catching, jamming or

being falsely aligned, causing the saw to jump

up uncontrollably and out of the workpiece in

the direction of the operator;

– if the saw blade catches or jams in a narrowing

saw cut, the blade can no longer rotate and the

power of the motor throws the appliance back

in the direction of the operator;

– if the saw blade twists in the saw cut or

becomes misaligned, the teeth at the rear edge

of the saw blade can become caught in the sur-

face of the workpiece, causing the saw blade

to jump out of the cut and the saw to jump

backwards in the direction of the operator.

A kickback is caused by incorrect use or misuse

of the saw. This can be avoided by taking proper

precautions as given below.

a) Hold the saw ﬁrmly in both hands and

position your arms so that they can absorb

the force of a kickback. Position your body

to either side of the saw blade, never in line

with the saw blade. If a kickback occurs, the

circular saw may jump backwards. However,

by taking appropriate precautions the operator

can control the kickback forces.

b) If the saw blade jams or you stop working,

switch the saw oﬀ and hold it steadily in the

workpiece until the saw blade has completely

stopped turning. Never attempt to remove the

saw from the workpiece or pull it backwards

while the saw blade is still moving as this

could lead to a kickback. Investigate and take

corrective actions to eliminate the cause of

blade binding.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 290795 PTSS 1200 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 290795 PTSS 1200 B1 Manual

Product: