746155
36
Zoom out
Zoom in
Previous page
1/135
Next page
PDMFG 180 A1
GB
IE
 33
Maintenance and cleaning
WARNING! RISK OF INJURY! Discon-
nect the tool from the compressed air
supply.
CAUTION!
Before maintenance, clean off any hazardous
substances that may have accumulated on
the tool (due to working processes). Avoid
all skin contact with these substances. If the
skin comes into contact with hazardous dusts,
this can lead to severe dermatitis. If dust is
produced or swirled up during maintenance,
it can be inhaled.
NOTE
To ensure correct functioning and a long service
life for the tool, pay attention to the following
points:
Sufficient and continuous oil lubrication is highly
important for optimum functioning.
Check the speed and vibration levels after each
use.
Check the idle speed regularly and after any
maintenance is performed:
use a rev counter and perform the measure-
ment without any clamped tools. At a residual
pressure of 6.3 bar, the idle speed may not be
exceeded under any circumstances.
If the tool is exhibiting excessive vibration levels,
the cause of the vibrations must be identified
and repaired.
Use only the genuine replacement parts recom-
mended by the manufacturer, otherwise you
could put users at risk. In doubt, contact the
Service Centre.
Clean the tool with a soft, dry cloth only.
Never use sharp or abrasive cleaning agents
under any circumstances.
Troubleshooting
Fault Possible
cause
Remedy
Speed too
slow, air
escapes from
the outlet.
Motor parts
jamming due
to dirt.
Check the
pressure
supply filter
for contamina-
tion.
Pressure sup-
ply too low.
Check the
pressure
supply filter
for contamina-
tion.
Lubricate the
tool as de-
scribed in the
instructions.
If necessary,
repeat the
steps outlined
above.
Tool does
not move;
compressed
air escapes
completely
through the
outlet.
Motor is
jammed due
to material
build-up.
Lubricate the
tool as de-
scribed in the
instructions.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of the tool in the household
waste!
Your local community or municipal authorities can
provide information on how to dispose of the tool.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285818 PDMFG 180 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285818 PDMFG 180 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info