746155
35
Zoom out
Zoom in
Previous page
1/135
Next page
PDMFG 180 A1
32 
GB
IE
Then, turn the attachment using slight force until
the lock engages on the tool.
Removing the attachment
To remove the respective attachment, pull the
locking ring downward.
Then, twist and pull out the attachment.
Operation
Compressed air ratchet
Put the required plug-in attachment onto the
square retainer .
Set the correct rotational direction on the turn
bolt
:
R = anticlockwise
F = clockwise
Fit the plug-in attachment onto the
screw head.
NOTE
The connection with the compressed air
source is made using a flexible compressed
air hose with a quick coupler.
You will reach the best performance of your
ratchet wrench with a compressed air hose
LW 10 mm.
Compressed air drill
Insert bit or drill:
Open the wheel-rim chuck
using the wrench
.
Now insert the drill as deeply as possible into
the wheel-rim chuck
.
To clamp the drill, close the wheel-rim chuck
using the wrench . Ensure the drill is firmly
attached.
Compressed air precision drill grinder
Fitting a tool:
CAUTION!
The shaft diameter of the tool must exactly
match the clamp bore of the collet chuck
(Ø 6.35 mm)!
Insert the tool in the collet chuck
.
Hold the spindle
using the assembly tool .
Tighten the collet chuck nut
using the assem-
bly tool .
Ensure the accessory tool is firmly attached.
CAUTION!
If no tool is inserted in the collet chuck
,
do not tighten the collet chuck nut with the
assembly tool , screw it on by hand only!
Switching on and off
Switching on:
First, press the trigger lock and then the
trigger forwards to switch the tool on.
Switching off:
Release the trigger
.
When you have finished working, disconnect
the tool from the compressed air source.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285818 PDMFG 180 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285818 PDMFG 180 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info