746566
37
Zoom out
Zoom in
Previous page
1/138
Next page
PDFW 120 A1
GB
IE
 33
Use the combination spanner to undo the
collet chuck mount on the flexible shaft .
Fit the tool and screw the collet chuck mount
back into place.
Release the black collar
.
Changing the collet chuck
You can change the collet chuck if the shaft
diameter of the tool you want to use is different.
Push the black collar
all the way back onto
the flexible shaft to lock the spindle. Note
that the collet chuck mount is loosened in an
anticlockwise direction. Hold the black collar
in this position.
Use the combination spanner
to undo the
collet chuck mount on the flexible shaft .
Unscrew the collet chuck mount .
Remove the collet chuck
and replace it with
a collet chuck with the desired diameter.
Replace the collet chuck mount
back on the
flexible shaft . Screw the collet chuck mount
tight using the combination spanner .
Release the black collar
.
Using the work arbor for cutting discs
Use the screw driver side of the combination
spanner
to undo and tighten the screw of the
work arbor for cutting discs .
Fit the work arbor for cutting discs
as
described into the flexible shaft .
Use the combination spanner
to undo the
screw on the work arbor for cutting discs .
Fit the desired cutting disc
/ onto the
screw between the two washers.
Use the combination spanner
to tighten the
screw on the work arbor for cutting discs .
Use the work arbor for polishing felts
Screw the tip of the work arbor for polishing
felts
clockwise into the corresponding hole
in the polishing felts / .
Fit the work arbor for polishing felts
as
described into the flexible shaft .
Using the work arbor for abrasive belts
Push the required abrasive belt
/ com-
pletely onto the corresponding work arbor for
abrasive belts / .
Use the combination spanner
to tighten the
screw on the work arbor / to fasten the
abrasive belts.
Fit the work arbor for abrasive belts
/ as
described into the flexible shaft .
Notes on working with materials/
tools/speed range
Never use the appliance for other purposes
and only use original parts/accessories. Using
attachments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury.
Determine the rotational speed range for work-
ing on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces.
Use a low rotational speed for work on plastics
and materials with a low melting point.
Use a high rotational speed for working on
wood.
Carry out cleaning, polishing and buffing work
in the medium speed range.
The following are recommendations only and not
binding. When carrying out practical work, carry
out your own tests to see which tool and which set-
tings are ideal for the material you are working on.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285802 PDFW 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285802 PDFW 120 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info