Manual Parkside IAN 285802 PDFW 120 A1 (page 33 of 138) (English, German, Dutch, French, Portuguese, Spanish)

746566

Zoom out

Zoom in

1/138

PDFW 120 A1

│

29 ■

Supplementary safety instructions

for working with wire brushes

Special safety instructions for working with

wire brushes:

a) Be aware that the brush can lose wire bristles

even during normal operation. Do not over-

stress the wires by applying excessive pres-

sure to the brush. The wire bristles can easily

penetrate light clothing and/or skin.

b) Allow the brush to run at working speed for

at least one minute before applying it to the

workpiece. Ensure that no one is standing in

front of or in line with the brush during this

time. Loose pieces of wire could ﬂy oﬀ during

the run-in period.

c) Aim the rotating steel brush away from your-

self. When working with these brushes, small

particles and minute pieces of wire can ﬂy oﬀ

at great speed and pierce skin.

Working safely

■ Keep your workspace tidy. Clutter in the work

area can cause accidents.

■ Take account of environmental inﬂuences!

Do not expose the power tool to rain. Do not

use the power tool in wet or moist environments.

Ensure that your workspace is adequately lit.

Do not use power tools where there is a risk of

explosion or ﬁre.

■ Protect yourself from electric shocks! Avoid

body contact with grounded surfaces (e.g.

pipes, radiators, electric cookers, refrigerators

and freezers).

■ Keep other people at a distance! Do not allow

other people, especially children, to touch the

power tool or the cord. Keep them out of your

work area.

■ Store unused power tools safely! Unused

power tools should be placed in a dry, high-up

or closed-oﬀ place out of the reach of children.

■ Do not overload your power tool! You will

work better and more safely in the speciﬁed

performance range.

■ Use the right power tool for the job! Do not

use low-performance tools for heavy work.

Do not use the power tool for purposes for

which it is not intended. For example, do not

use a circular saw to cut tree branches or logs.

■ Wear suitable clothing! Do not wear loose cloth-

ing or jewellery that could get caught in moving

parts. Wear non-slip footwear when working

outdoors. If you have long hair, wear a hairnet.

■

Use protective equipment! Wear safety

goggles. Use a breathing mask for work

which produces a lot of dust.

■ Connect the dust extraction device! If there

are connections for dust extraction and collec-

tion, make sure that these are connected and

used properly.

■ Do not use the cord for purposes for which

it is not intended! Do not pull on the cord to

unplug the power tool. Protect the cord from

heat, oil and sharp edges.

■ Secure the workpiece! Use clamps or a vice to

hold the workpiece ﬁrmly in place. This is much

safer than simply holding it in your hand.

■ Do not overreach! Keep both feet on the

ground an maintain your balance at all times.

■ Maintain tools with care! Keep the cutting

tools sharp and clean to be able to work better

and more safely. Follow the instructions on lubri-

cation and exchanging tools. Check the power

cord regularly and have it replaced by a certi-

ﬁed specialist if it is damaged. Check extension

cords regularly and replace them if they are

damaged. Keep the handles dry, clean and free

from oil and grease.

■ Unplug the appliance from the mains socket!

When the power tool is not in use, before main-

tenance and when changing tools.

■ Never leave any tool key attached! Check

that all keys and adjusting tools are removed

before switching the appliance on.

■ Avoid accidentally starting the appliance!

Ensure that the switch is switched to oﬀ before

inserting the plug into the wall socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285802 PDFW 120 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 285802 PDFW 120 A1 Manual

Product: