746412
26
Zoom out
Zoom in
Previous page
1/101
Next page
PABH 20-Li B2
22 
GB
IE
Operation
Select operating mode
Use the “Drill/hammer drill” switch to select
the operating mode of the power tool.
NOTE
Change the mode only when power tool is
switched off. Otherwise, the tool could be
damaged.
To change the operating mode, turn the “Drill/
hammer drill” switch
to the desired position.
Hammer drilling = Hammer ON
Drilling/screwing = Hammer OFF
Setting the rotation direction
NOTE
Operate the rotation direction switch
only
when the appliance is at a standstill.
You can use the rotation direction switch
to
change the direction of rotation of the power
tool. This is not possible, however, while the on/
off switch is pressed in.
Clockwise:
For drilling and screwing in screws, turn the
rotation direction switch
to the left as far
as the stop.
Anti-clockwise:
For undoing and removing screws and nuts, turn
the rotation direction switch
to the right as
far as the stop.
Switching on/off
Switching on:
To start the power tool, press the on/off switch
and keep it pressed in.
The lamp
lights up when the on/off switch
is pushed in slightly or fully and illuminates the
working area in low light conditions.
Switching off:
To switch off the power tool, let go of the on/
off switch
.
At low temperatures, the power tool will only
reach its full hammer performance/strike power
after a certain time.
To save energy, do not switch the power tool
on unless you plan to use it.
Set drill/hammer speed
You can infinitely adjust the drill/hammer speed
of the switched on power tool, depending on
how far the on/off switch is pressed in.
Pressing the on/off switch lightly yields a
low drill/hammer speed. Increasing pressure
increases the speed.
Run-on brake:
When you release the on/off switch
, the
brake stops the chuck and prevents run-on of
the tool.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 284962 PABH 20 Li B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 284962 PABH 20 Li B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info