Manual Parkside IAN 284962 PABH 20 Li B2 (page 25 of 101) (English, German, Dutch, French, Portuguese, Spanish)

746412

Zoom out

Zoom in

1/101

PABH 20-Li B2

│

21 ■

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack:

♦ Push the rotation direction switch

into the

middle position (lock). Allow the battery pack

to click into the handle.

Removing the battery pack:

♦ Press the release button

and remove the

battery pack .

Operation

NOTE

► Push the rotation direction switch

into

the middle position before carrying out

any work on the power tool (e.g. mainten-

ance, tool-changing, etc.) as well as during

carriage and storage of the power tool.

Unintentional activation of the On/Oﬀ

switch can result in injury.

Selecting a tool

■ For hammer drilling, you will need an SDS-plus

drilling tool.

■ For standard drilling in wood, metal, ceramics

and plastic, you can use an appropriate SDS-

plus drilling tool or a tool with a hexagonal

shank.

■ For screwing, use the screwdriver bits that

you can attach using the SDS bit adapter .

Tool-changing

■ You can use the SDS-plus tool holder to

change tools quickly and easily without the

need for any additional tools.

■ The SDS-plus drilling tool moves freely (depend-

ing on the system). This leads to a radial run-out

deviation while idling. This has no eﬀect on the

accuracy of the drill hole as the drill centres

itself during drilling.

■ The SDS-plus bit adapter

can also hold dif-

ferent types of drills with hexagonal shanks.

■ The dust protection cap

largely prevents the

entry of drilling dust into tool holder during

operation. Ensure that the dust protection cap

does not get damaged when ﬁtting tools.

NOTE

► A damaged dust protection cap

must

be replaced immediately. We recommend

having this done by a customer service

workshop.

Fitting an SDS tool

♦ Insert the tool rotatingly into the tool holder

until it clicks into place.

♦ Check that the tool is properly locked by pulling it.

The system has radial play because of the design.

Removing an SDS tool

♦ Pull the locking sleeve backwards and re-

move the tool.

Fitting a tool with a hexagonal shank

♦ Insert the SDS bit adapter into the tool holder

until it clicks into place.

♦ Check that the SDS bit adapter

is properly

locked by pulling it. The SDS bit adapter has

radial play because of the design.

♦ Pull the locking sleeve

of the SDS bit adapter

backwards and insert the tool with the hex-

agonal shank in the tool holder .

♦ Release the locking sleeve

of the SDS bit

adapter . This locks the holder. Check that

the tool with the hexagonal shank is properly

locked by pulling it. The tool with the hexagonal

shank has radial play because of the design.

Removing a tool with a hexagonal

shank

♦ Pull the locking sleeve backwards and remove

the tool with the hexagonal shank.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 284962 PABH 20 Li B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 284962 PABH 20 Li B2 Manual

Product: