Manual Parkside IAN 282495 PTSS 1200 B1 (page 23 of 92) (English, German, Dutch, French, Portuguese, Spanish)

746418

Zoom out

Zoom in

1/92

PTSS 1200 B1

■ 20

│

NOTE

► Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth height

should be visible below the workpiece.

Setting the cutting angle

(mitre angle)

♦ Loosen the two adjustment wheels for the

cutting angle .

♦ Tilt the motor to the desired cutting angle.

♦ Retighten the adjustment wheels

NOTE

► If you have set the cutting angle adjustment to

0° or 45°, you can use the ﬁne adjustment

screws

and

to make any ﬁne adjust-

ment that you require.

Note the cut line

♦ Cut line markings

of 0°/45° are imprinted

into the base plate .

♦ Align the appliance to the corresponding 0°

or 45° cut line markings

in accordance

with the set cutting angle.

♦ The inclined surfaces are reference points for

this.

♦ Connecting the guide rails

The guide rails will help you to make straight

cuts.

♦ To connect the 2 guide rails, push the connec-

tor

into the groove of the guide rails. Tighten

the grub screws using the Hex key supplied.

NOTE

► The guide rails

have a splinter guard

(black rubber lip). The splinter guard must be

adjusted before making the ﬁrst cut. Place the

guide rail onto a workpiece. Set a cutting

depth of approx. 10 mm. Switch the circular

saw on and push it gently and evenly in the

cutting direction.

Eccentric screws

The eccentric screws are intended for adjusting

the ﬁt of the base plate on the guide rail .

♦ Tighten the eccentric screws

to reduce the

play between the circular saw and the guide

rails .

Sawing (without guide rail)

Right-angled sawing

♦ Hold the machine with both hands ﬁrmly on the

handles

and .

♦ Switch on the appliance as described in

"Switching on and oﬀ".

♦ Place the appliance with the front part of the

base plate

on the workpiece.

♦ Swivel the motor down and saw forwards with

moderate pressure – never backwards.

Mitre angles up to 45°

♦ Adjust the cutting angle as described.

♦ Hold the machine with both hands ﬁrmly on the

handles

and .

♦ Switch on the appliance as described in

"Switching on and oﬀ". Place the appliance

with the front part of the base plate

on the

workpiece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282495 PTSS 1200 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 282495 PTSS 1200 B1 Manual

Product: